Binder C 150 (20 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the usable chamber volume and how many samples can it hold?
The Binder C 150 provides a 150‑litre usable chamber, which accommodates a variety of vessels and sample racks. Exact sample count depends on vessel size and shelving arrangement; avoid overcrowding to maintain uniform conditions and allow good airflow between items.
What temperature range does the incubator support and how precise is control?
The unit operates across a broad range, typically from about 4 °C up to 60 °C, with tight control and uniform distribution across the chamber. For best results, pre‑equilibrate the chamber and allow adequate recovery time after door openings.
How is CO2 concentration controlled and what range is available?
An integrated CO2 sensor manages gas concentration, typically up to 20%, with closed‑loop control to keep setpoints stable. Use appropriate setpoints for your application (for example around 5% for many mammalian cultures) and allow time for equilibration after changes.
How does the incubator maintain humidity and reduce sample evaporation?
Humidity control is achieved with a water pan that increases local humidity and reduces evaporation from culture vessels. Maintain water level regularly, use sterile distilled water to reduce contamination risk, and replace the pan for routine cleaning or between critical experiments.
How should I arrange samples to ensure uniform temperature and gas distribution?
Arrange samples with space between vessels and avoid blocking air paths or sensor areas. Use a single layer per shelf where possible, distribute larger items evenly, and avoid stacking that traps air. Periodically rotate samples if uniformity verification is required.
What safety features protect cultures and the unit in case of faults?
Safety features include over‑temperature alarms, automatic shutdown on critical faults, and visual/audible alerts for exceeded setpoints. These functions protect cultures and equipment; configure appropriate alarm limits and test alarm operation routinely to ensure reliable protection.
How should I clean and disinfect the interior without damaging components?
Clean using mild, non‑corrosive disinfectants compatible with stainless interiors; remove shelves and the water pan before wiping surfaces. Avoid spraying directly on sensors and electronic controls, and dry all parts thoroughly before reuse to prevent corrosion or sensor interference.
How often should the CO2 sensor and temperature control be calibrated?
Calibration frequency depends on application criticality, but annual calibration is typical for many labs. For high‑precision assays or regulatory environments, perform more frequent checks and document calibration results to ensure accurate CO2 and temperature control.
What routine maintenance keeps the incubator operating reliably long term?
Routine tasks include refilling and cleaning the water pan, cleaning chamber surfaces and shelves, checking door seals, verifying alarm function, and scheduling periodic service inspections. Promptly address any unusual noises or fluctuations to prevent performance degradation.
What installation and power requirements should I consider for safe operation?
Install the unit on a level, stable surface with adequate ventilation around the cabinet and access for service. Use a dedicated laboratory mains circuit appropriate for the instrument; consult your facility electrician to ensure correct grounding and overload protection for uninterrupted operation.