Bpt DMVC/01 (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I program a call button on the external unit?
To program a call button, lift the handset (if present) of the receiver you want to configure and press both door lock release and AUX2 buttons. On the entry panel, press the desired call key to associate it with the internal device; an acoustic signal confirms successful storage.
What are the technical specifications for DMC/01 and DMVC/01?
The DMC/01 and DMVC/01 units operate on 14-18 VDC, consume 150 mA (DMC) or 345 mA (DMVC), have dimensions of 95x130x35 mm, function within -15°C to +50°C operating temperature range and store between -25°C to +70°C. They support PAL video standard with a resolution of 680x512 pixels.
How do I connect the external unit to power?
Connect the positive terminal (+) to the DC power supply (14-18 VDC), and ensure the negative terminal (-) is properly grounded. The connection should be made according to the wiring diagram provided in the manual.
What are the functions of the connectors on the unit?
The MIC connector connects to a microphone, PUSH BUTTON connects up to four call buttons, KEYBOARD for numeric keypad modules, VZS for encoding module connections, RFID for access control systems, and MINI USB is used for programming purposes.
How do I enter the programming mode?
Press and hold the PROG button on the power supply until the LED turns on. This initiates the programming mode; if it does not respond immediately, check connections between the power source and unit before retrying.
What should I do after completing a call configuration?
Once all configurations are set, briefly press the PROG button to exit programming mode. The LEDs will turn off automatically, confirming that changes have been saved successfully.
How can I reprogram an existing call key on the external unit?
To reconfigure a call key, lift the handset (if present) of the receiver you want to adjust and press both door lock release and AUX2 buttons. On the entry panel, select the desired call key for association; an acoustic signal confirms that storage has been completed.
How do I assign codes or tags to a button on the external unit?
To assign a code or tag to a button, enter programming mode and position the RFID PROG jumper in the '+' position. Use the reader with an already addressed badge/tag; after confirmation tone, press the desired group's button for assignment.
How do I adjust the camera’s field of view on the external unit?
When the system is in programming mode, use any receiver to access and modify the camera settings. With the handset lifted (if present), press 'Autoinsertion' to cycle through 10 possible configurations using AUX1 or AUX2 buttons.
What should I do if there are errors during configuration?
If an error tone occurs, it indicates that a maximum number of codes/tags has been exceeded for the group. Ensure you stay within the allowed limit (up to 5 per group) and avoid overloading any single entry panel or system.
Related products from Bpt
VAS/100.20
User manual 4 pages
HTI
User manual 2 pages
DC/08 ME
User manual 2 pages
DC/08 ME
User manual 8 pages
DC/08 ME
User manual 24 pages
DC/08 ME
User manual 24 pages
DC/08 ME
User manual 24 pages
DC/08 ME
User manual 32 pages
AZ/98
User manual 2 pages
DPF NF
User manual 8 pages
DPF NF
User manual 32 pages
DPF NF
User manual 24 pages
DPF NF
User manual 24 pages
DPF NF
User manual 24 pages
DPF NF
User manual 8 pages
DPF NF
User manual 2 pages
DVC/01
User manual 2 pages
DVC/01
User manual 8 pages
DVC/01
User manual 32 pages
DPF AL
User manual 2 pages