m-e ADF-710 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I pair the indoor and outdoor units?
To pair the indoor and outdoor units, ensure both units are powered on. Press and hold the volume down button on the indoor unit until the talk button blinks blue. Press the doorbell button on the outdoor unit, then press the pairing button using a bent paperclip. If pairing is successful, the pairing mode ends and the LED indicators turn off.
How do I install the outdoor unit?
Before installation, check if the wireless range between the indoor and outdoor units meets your requirements. The outdoor unit is designed for surface mounting. Mark the two holes on the mounting location. Use double-sided tape to transfer the holes to the back of the unit, then use a pin to mark them. Drill accordingly, using provided screws with or without wall plugs. Ensure there is about 3mm space between the wall and the screw head.
How do I mount the outdoor unit?
Remove the front cover by unscrewing the front cover screw and pulling it forward. Open the battery compartment. Hang the outdoor unit on the screw and secure it with another screw through the hole in the battery compartment. Reassemble the unit in reverse order.
How do I power the outdoor unit?
The outdoor unit can be powered by batteries or an external power supply, such as an 8-12V DC doorbell transformer or a 12V DC power adapter. For batteries, insert 3 C-type batteries into the battery compartment according to the polarity markings. For external power, connect the power supply to the terminal block (18) without worrying about polarity. An optional power adapter can be connected to the network adapter port (20).
How do I power the indoor unit?
Connect the provided power adapter to the socket on the charging foot and to the mains supply (230V / 50 Hz). The LED on the charging foot turns green when connected. Insert the provided AAA NiMH batteries into the battery compartment correctly. Place the indoor unit into the charging foot. The LED turns red to indicate charging, and turns green once charging is complete.
What are the safety precautions for the ADF-710?
Do not use electrically operated products in explosive areas, such as near flammable liquids, gases, or dust. Avoid exposing the power supply to rain or moisture, as water ingress increases the risk of electric shock. Do not misuse the power cable; never use it to pull the plug from the socket. Keep the cable away from heat, oil, sharp edges, and moving parts. Ensure the power adapter fits the socket and do not alter the plug in any way.
What is the purpose of the pairing button?
The pairing button is used to connect the indoor and outdoor units. It must be pressed during the pairing process after the indoor unit's volume down button is held down and the talk button blinks blue. This initiates the pairing mode, which ends automatically once the units are successfully connected.
How do I replace the batteries in the outdoor unit?
To replace the batteries, remove the front cover by unscrewing the front cover screw and pulling it forward. Open the battery compartment and remove the old batteries. Insert 3 new C-type batteries according to the polarity markings inside the compartment. Close the battery compartment and reattach the front cover with the screw.
What should I do if the LED on the charging foot does not light up?
If the LED on the charging foot does not light up, check that the power adapter is properly connected to both the charging foot and the mains supply. Ensure the power adapter is compatible with the unit and that the socket is functioning. If the issue persists, consult the user manual or contact customer support.
How do I adjust the volume on the indoor unit?
To adjust the volume on the indoor unit, use the volume up and volume down buttons. The volume up button increases the volume, while the volume down button decreases it. Ensure the unit is powered on and the volume settings are adjusted according to your preference for optimal communication.
Related products from m-e
ADF-701 EX
User manual 25 pages
VISTUS AD
User manual 36 pages
BELL-501 TX
User manual 50 pages
BELL-502 TX
User manual 50 pages
BELL-503 TX
User manual 50 pages
ADV-1020
User manual 68 pages
ADV-1010
User manual 68 pages
ADF-210
User manual 68 pages
KTE-1
User manual 74 pages
KTE-2
User manual 74 pages