Axis P3344-V (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the AXIS P3343/P3343-V/P3344/P3344-V network camera?
To install the camera, first ensure all required components are available. Mount the camera on the wall using the provided mounting bracket and screws. Route the network cable through the wall and connect it. Secure the camera unit to the bracket and ensure the dome cover is properly positioned.
What is the default IP address for the network camera?
If your network does not have a DHCP server, the default IP address for the network camera is 192.168.0.90. You can use AXIS IP Utility or AXIS Camera Management to assign a static IP address if needed.
How do I set the password for the camera?
To set the password, access the camera’s web interface and use the Configure Root Password dialog. For security, use an encrypted HTTPS connection by creating a self-signed certificate. Enter the password twice and confirm it. The default username is 'root' and cannot be deleted.
The installation requires a drill template, screws, plugs, and a screwdriver. You will also need a network cable and possibly a metal conduit for protecting the cabling when mounted along the wall.
Can the camera be mounted on a junction box?
Yes, the mounting bracket can also be used to mount the network camera on a junction box. Ensure the camera is securely attached and all cables are properly routed and connected.
How do I adjust the camera lens?
To adjust the lens, access the Live View page in the web interface. Loosen the locking and tilt adjustment screws, position the lens as desired, and ensure the horizon lines are aligned. Tighten the screws once the position is set. Adjust the focus using the Focus Adjustment page under Basic Configuration.
What is the battery type for the camera?
The AXIS P3343, P3343-V, P3344, and P3344-V Network Cameras use a 3.0V CR2032 Lithium battery. Ensure the battery is properly installed and replaced when necessary to maintain functionality.
How do I clean the camera dome?
After mounting the camera, clean the dome with a dry soft cloth to remove dust and fingerprints. Use a blower to clear dust from the lens. Ensure the dome is securely fastened with tamper-proof screws to prevent unauthorized access.
What should I do if I lose the password?
If the password is lost, the network camera must be reset to the factory default settings. This will restore the default username and password, but all custom settings will be erased. Refer to page 12 of the manual for instructions on resetting the camera.
What are the electromagnetic compatibility requirements?
This equipment must be installed and used in accordance with EMC standards. Shielded (STP) network cables must be used to ensure compliance. If interference occurs, try reorienting the antenna, increasing separation from the receiver, or using a different circuit. Consult a technician for further assistance.
Related products from Axis
P12 Mk II
User manual 17 pages
P1265
User manual 19 pages
P1264
User manual 17 pages
P12 series
User manual 104 pages
P12 Serie
User manual 17 pages
P12 Serie
User manual 170 pages
0925-001
User manual 17 pages
0927-001
User manual 19 pages
M10 Serie
User manual 20 pages
M10 Serie
User manual 114 pages
P13 Serie
User manual 104 pages
P13 Serie
User manual 114 pages
P13 Serie
User manual 114 pages
Q60 Serie
User manual 116 pages
Q60 Serie
User manual 170 pages
Q60-E Serie
User manual 116 pages
P3224-LVE Mk II
User manual 28 pages
M30 Series
User manual 26 pages
M30 Serie
User manual 26 pages
M4206-V
User manual 29 pages