D-Link DCS-1201 (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I power the camera via PoE?
To power the camera via PoE, connect an Ethernet cable to the LAN(PoE) port on the control box. Then connect the other end of the cable to your PoE switch or PoE injector to provide power.
What are the power terminal specifications?
The power terminal specifications are: Pin + for 8-28 V DC input and Pin - for ground. Ensure the power source matches these requirements to avoid damage to the camera.
How do I connect the camera cable?
Connect the camera cable to the CAM port on the control box. This ensures proper communication between the camera and the control box for video and data transmission.
How do I configure the camera using the Setup Wizard?
Insert the DCS-1201 CD into your computer's CD-ROM drive. If Autorun is disabled, manually run D:\autorun.exe. Launch the Setup Wizard, select your camera, and enter the admin ID and password to proceed with configuration.
What is the default IP address for the camera?
If your network does not use a DHCP server, the camera's default static IP address is 192.168.0.20. This IP will be displayed if no valid IP is assigned by a DHCP server.
How do I access the camera via a web browser?
After configuring the camera, use the D-Link Setup Wizard SE icon in your Start menu to access the web configuration. Enter the default username 'admin' and leave the password blank to log in and view live video.
How do I mount the camera on a wall or ceiling?
Use the included screws to mount the camera in the desired location. Attach the camera cover, and ensure the mounting is secure to prevent movement or damage.
How do I install the camera covertly?
Drill a 9 mm hole in the wall or ceiling, no more than 5 mm thick. Attach the flat mounting bracket with adhesive to the inside of the wall, insert the camera, and secure it with screws and washers as shown in the manual.
How do I mount the control box?
Use four screws to attach the mounting plates to the control box. Then use two screws to mount the control box in the desired location, ensuring it is stable and secure.
Where can I find additional support for the camera?
Additional help and product information is available online at http://www.dlink.com. You can also refer to the user manual included on the CD-ROM for detailed instructions and troubleshooting guidance.