Eneo ITB-7SF0013M0A (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the camera?
To install the camera, locate the mounting template at the installation position and drill the ceiling or wall if needed. Place the easy bracket on the pre-drilled position and fix it using mounting screws. Route the Ethernet and power cable to the connecting place, then hook up the camera bracket with the easy bracket as illustrated. Fix the camera bracket using assembly screws, set the viewing angle, and attach the sunshield.
What are the power supply options?
The camera can operate with either 24VAC or 12VDC, and it supports PoE (IEEE Std. 802.3af). Ensure the power is disconnected before installation. If using local power, connect the low voltage first, then plug the AC adapter to avoid power issues. When both PoE and local power are connected, local power takes priority.
How do I adjust the pan and tilt?
To adjust the pan and tilt, unlock the screw on the camera bracket using the torque wrench. Set the viewing angle and lock the screw. The pan is limited to +/- 90°, and the tilt is limited to 0° (2°) min to 90° max for wall or ceiling installation. The inclination is limited to +/-90° max for horizontal image alignment.
What are the safety precautions for installation?
Ensure the camera is mounted on a structural object like concrete or a wall stud. Avoid exposing the camera to direct sunlight or strong light sources. Do not scratch the window surface during installation. Protect the device from water, humidity, and dust. Always use the plug to disconnect cables and never pull on the cable directly.
How do I connect the cables?
Plug the network cable into the RJ-45 Ethernet port. If using PoE, no power terminal connection is needed. For local power, connect the low voltage (DC12V or AC24V) first, then plug the AC adapter. Ensure the cables are not damaged, kinked, or exposed to hazardous areas. Attach the signal assignment sticker for wiring reference.
What should I do if moisture enters the system?
If moisture enters the system, do not switch on the devices under these conditions. Instead, send the device for examination to an authorized specialist workshop. Ensure the seals are correctly installed and not displaced during installation. Damaged seals will invalidate any warranty claims.
How do I reset the IP settings?
To reset the IP settings, locate the IP Reset button on the camera. This will restore the default network configuration. Ensure the camera is disconnected from the power supply before resetting. After resetting, reconfigure the network settings through the web viewer.
What are the environmental operating conditions?
The camera must be operated within the temperature range specified in the data sheet and within the defined air humidity range. Avoid excessive heat, dust, humidity, and vibration. Ensure the housing is sealed properly and use silicone to seal cable outlets as per the technical data.
What safety measures are required for the IR spotlight?
Maintain a safety margin of >1m from the IR spotlight when viewing directly into it in a darkened environment. Do not look directly at invisible LED radiation using optical instruments, as this can damage the eyes. A multipolar, easily accessible isolation device should be installed near the IR spotlight for service work.
How should I dispose of the product?
This product should not be disposed of with other household waste. Separate it from other types of waste and recycle it responsibly to promote sustainable reuse of material resources. Contact the retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier for recycling instructions.
Related products from Eneo
ISM-65F0028W0A
User manual 20 pages
VKCD-1327WSM/MF
User manual 20 pages
ISM-68F0028W0A
User manual 20 pages
VKCD-1328WSM/MF
User manual 20 pages
ISM-62F0028W0A
User manual 20 pages
MPC-52C0000M0A
User manual 27 pages
HDC-2180Z03 D
User manual 28 pages
HDC-2180Z03 D
User manual 44 pages
ISM-52F0021WMA
User manual 28 pages
INP-72A0018MIA
User manual 28 pages
IND-32F0016P0A
User manual 28 pages
INP-75A0033MIA
User manual 28 pages
IND-68M2812MFA
User manual 28 pages
IND-45F0028M0A
User manual 28 pages
INB-65M2812MFA
User manual 28 pages
IND-62M2812M0A
User manual 28 pages
IND-65M2713M0A
User manual 28 pages
INB-55M2713M0A
User manual 28 pages
IND-42M2808M0A
User manual 28 pages
IND-65M2812MFA
User manual 28 pages