Protool BSP 85 E (75 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting depth in wood?
The maximum cutting depth in wood is up to 85 mm. This allows for deep cuts and cut-outs in various wood materials.
What is the maximum cutting depth in steel?
The maximum cutting depth in steel is up to 10 mm. This ensures safe and efficient cutting of thin steel materials.
How do you adjust the bevel angle?
To adjust the bevel angle, loosen the screw (14) slightly, then move the base plate (1) to the desired angle. The angles 0°, 15°, 30°, and 45° can be read from the scale (13).
What is the weight of the tool?
The tool weighs 2.5 kg, making it lightweight and easy to handle during operation.
How do you install a saw blade?
To install a saw blade, first disconnect the machine from power. Place the pendulum lever in the vertical position, loosen the fastening screw, and insert the blade so that the back side lies in the groove of the guide roller.
How do you change the saw blade?
To change the saw blade, loosen the fastening screw and remove the old blade. Insert the new blade and secure it with the fastening screw, ensuring it is properly aligned with the guide roller.
What is the maximum stroke rate?
The maximum stroke rate is 3,500 min-1, which allows for fast and efficient cutting in various materials, especially when working with harder substances.
What is the purpose of the anti-splintering device?
The anti-splintering device helps produce a clean cut on the top surface of the workpiece by preventing splinters and ensuring a smooth finish.
How do you adjust the pendulum action?
The pendulum action can be adjusted in four stages (0 to III). This allows you to customize the blade penetration for different materials, with higher settings suitable for softer materials and lower settings for harder materials.
How do you perform parallel cuts?
To perform parallel cuts, insert the parallel guide into the holder in the base plate and secure it with two locking screws. The maximum adjustable cut width is approximately 160 mm, allowing for precise and consistent cuts.