GBG DRINK MAGIC (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the compliance directives for CE-marked machines?
Machines marked CE comply with essential safety and hygiene requirements under the following directives: 2006/42/CE (Machines), 2006/95/CE (Low Voltage), 2004/108/CE (EMC), 97/23/CE (PED), and (CE) 1935/2004 (Materials in contact with food). These directives ensure the machine meets safety, electromagnetic compatibility, and food contact material standards.
What information is displayed on the machine's rating plate?
The rating plate includes the manufacturer's name, machine model, production year/serial number, electrical specifications (voltage, frequency, power), type and quantity of refrigerant gas, and compliance with relevant directives. This information is essential for proper operation, maintenance, and disposal.
How should electrical and electronic equipment be disposed of?
Electrical and electronic equipment must be disposed of in accordance with European Directive 2002/96/EC. These items cannot be disposed of as regular municipal solid waste but must be collected separately to optimize recovery and recycling of materials. The crossed-out wheeled bin symbol indicates the need for separate collection.
What is the recommended temperature setting for the cooling system?
The electronic thermostat is pre-set to 4°C. This ensures the cooling system stops when the product reaches this temperature. Users can adjust the temperature between 0°C and 10°C using the control panel, which allows for precise temperature regulation to maintain product quality.
How long should the machine cool before accessing internal components?
Before removing protective panels, the machine must be disconnected from the power supply and allowed to cool for at least 20 minutes. This ensures the high-pressure compressor tube cools down, reducing the risk of injury and ensuring safe maintenance procedures.
What should be done if the product level in the tank drops below the seal?
If the product level in the tank drops to the seal, the tank should be refilled immediately to avoid running the machine empty. Operating the machine without sufficient product can damage internal components and affect performance.
What are the electrical requirements for installation?
Before connecting the machine to the power supply, check the voltage and frequency specifications on the machine's rating plate. Use a grounded socket as per current regulations. If the socket lacks grounding, consult a qualified electrician to ensure safe operation.
How do you adjust the cooling system temperature?
To adjust the cooling system temperature, press the temperature setting button until the display shows 'PrG'. Then press the button again to enter the temperature adjustment mode. Use the up/down buttons to set the desired temperature between 0°C and 10°C, and confirm the setting after 5 seconds.
What is the purpose of the cooling system timer?
The cooling system has a timer that delays the start of the cooling process by approximately four minutes. This allows the system to balance internal pressure within the compressor, ensuring efficient and safe operation of the cooling mechanism.
What should be done before starting the machine for the first time?
Before starting the machine, ensure the tank is filled with the selected product up to 2-3 cm below the top edge. Verify that the machine is properly grounded and connected to the correct voltage and frequency. Consult the operation section for detailed steps to ensure safe and effective startup.