Bematech MP-4000 TH (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the printer?
To install the printer, first unpack the box and ensure all items are present. Connect the power supply to the printer using the DC cable, and plug the power cord into a grounded electrical outlet. Turn on the printer using the on/off switch and confirm the Power On LED is lit.
How do I load thermal paper?
To load the thermal paper roll, lift the cover lever and open the cover. Insert the paper roll so that it feeds towards the outside of the printer. Close the cover and check if the Info LED is lit, which indicates the printer is ready to use.
To adjust the paper width, pull the spacer and insert it into the desired position corresponding to the paper width. The printer must be programmed to print in the new width. Refer to the User's Manual for detailed instructions on configuring the printer.
How do I perform a self-test?
To run a self-test, turn off the printer, press and hold the Paper Feed button, then switch the printer on. When the printer starts printing, release the Feed button. A message will appear asking you to wait for the self-test or choose another mode. After the test, the printer returns to the 'Ready' status with a green Info LED.
How do I access the Help summary?
To access the Help summary, turn off the printer and press and hold the Cut button while turning it on. This will display a summary of available help options and functions.
What is the recommended operating environment for the printer?
The MP-4000 TH should be placed on a flat and stable surface. Ensure the printer is unobstructed, especially around the paper exit area. Avoid holding or pulling receipts while they are being printed to prevent damage.
What are the available communication ports?
The printer supports multiple communication ports including Serial DB-9, Serial DB-25, USB, Bi-directional Parallel, and Ethernet. Connect the appropriate communication cable to the corresponding port on the printer and the host system.
How do I connect the power supply?
Connect the DC cable of the power supply to the DC connector on the printer. Ensure the arrow on the DC connector is facing up. Then, plug the power cord into the power supply's AC connector and a grounded electrical outlet.
What is the purpose of the spacer?
The spacer is used to adjust the paper roll width to accommodate different paper sizes, such as 58mm, 76mm, or 80mm. It can also be used for widths up to 82.5mm without a spacer. Adjust the spacer according to the paper width you are using.
What should I do if the Info LED is not lit?
If the Info LED is not lit after loading the paper, check that the paper is properly inserted and the cover is closed. Ensure the printer is powered on and the power supply is correctly connected. If the issue persists, refer to the User's Manual for troubleshooting steps.