IKA RCT basic (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum temperature of the heating plate?
The adjustable heating plate can reach a maximum temperature of 310°C. It is important to note that this temperature may remain for some time after turning off the device due to residual heat.
How do I set the safety temperature limit?
To set the safety temperature limit, turn off the main switch and use a screwdriver to adjust the setting. The displayed value will show 'SAFE' when correctly configured. Ensure that this limit is at least 25°C below the flash point of the medium being processed.
What are the operating modes for the device?
The device has two main operation modes: Mode A and Mode B. In Mode A, all settings remain after power off or disconnection, with functions turned off by default. In Mode B, previous settings persist, and function states from before shutdown are retained.
How do I connect an external temperature sensor?
To use an external temperature sensor like the ETS-D5, ensure it is fully submerged in the medium (at least 20 mm). Connect the PT1000 or contact thermometer to port L. The LED for 'external temperature sensor' will light up once connected.
What safety precautions should I take when using this device?
Always ensure that only trained personnel operate the equipment, and keep it away from water and flammable materials. Avoid placing containers on unstable surfaces or near heat sources. Ensure proper grounding of the power supply to prevent electric shocks.
What types of media can be processed with this device?
The device is suitable for processing liquids as long as their flash point exceeds the set safety temperature limit (50°C–360°C). Avoid using it on flammable or explosive materials, and ensure that all containers are sealed when handling hazardous substances.
How do I clean the device?
To clean the device, unplug it first. Use only recommended cleaning agents such as isopropyl alcohol for stains, detergents for general use, or specialized solvents for specific materials like cosmetics or foodstuffs. Ensure no moisture enters the equipment during cleaning.
What should I do if there's a fault with the device?
If you encounter an error code, refer to the troubleshooting section in the manual. For repairs, ensure that all hazardous substances are removed and return the unit in its original packaging for service. Do not attempt self-repairs unless qualified.
What is the purpose of the safety circuit?
The safety circuit prevents overheating by automatically shutting down the device if temperatures exceed safe limits. It ensures that no part of the equipment reaches dangerous levels, protecting both users and surrounding materials from potential hazards.
How do I adjust the temperature control mode?
To switch between PI-Modus (proportional-integral) or 2P-Mode (two-point regulator), set the desired temperature to 2°C, turn off the device, hold down the Temp knob, and then power it back on. The display will show '2P' if switched to two-point mode.
Related products from IKA
C 7030
User manual 3 pages
topolino mobil
User manual 62 pages
topolino mobil
User manual 68 pages
C-MAG HS 7 digital
User manual 28 pages
C-MAG HS 7 digital
User manual 34 pages
C-MAG HS 7 digital
User manual 48 pages
C-MAG HS 7 digital
User manual 60 pages
C-MAG HS 7 digital
User manual 66 pages
C-MAG HS 7 digital
User manual 273 pages
Mini MR standard
User manual 40 pages
Mini MR standard
User manual 40 pages
C-MAG HP4
User manual 28 pages
C-MAG HP4
User manual 34 pages
C-MAG HP4
User manual 60 pages
C-MAG HP4
User manual 66 pages
S 25 KD-LR-18 G
User manual 7 pages
S 25 KD-25 G-ST
User manual 7 pages
S 25 KD-LR-25 G
User manual 7 pages
HB 10.3
User manual 8 pages
ULTRA-TURRAX T 25
User manual 194 pages