EINHELL 23.201.20 (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to charge the Li-Akku-Pack?
To charge the Li-Akku-Pack, first remove it from the Akkuaufnahme by pressing the Rasttaste down. Ensure the voltage on the device matches the charger's voltage. Plug the charger into the socket, and the green LED will start blinking. Push the Akku onto the charger. If charging is not possible, check the socket and the charger contacts.
What does the LED indicator on the charger mean?
The LED indicator on the charger shows the charging status. A red LED indicates the charger is not connected or the Akku is not inserted. A green LED means the charger is connected and ready. If the LED is blinking, the Akku is charging. If all LEDs blink, the Akku temperature is too low, and it needs to be left at room temperature for a day.
How to adjust the brightness of the lamp?
The brightness can be adjusted in three levels. Press the Helligkeitseinstellung to increase the brightness by one level each time. The current brightness level is displayed on the Anzeige (9). The lamp always starts at the lowest brightness level.
What is the maximum clamp width of the lamp?
The maximum clamp width of the lamp is 40 mm. The clamp can be used for both round surfaces (minimum Ø20 mm) and flat surfaces like a table top. Ensure a secure grip by pressing the Klemmhebel down and placing the object between the clamp and the clamp area.
What are the technical specifications of the lamp?
The lamp has a voltage of 18 V d.c., 36 LEDs, a light output of 1500 lm, and a weight of 0.46 kg. It is designed for general household lighting and should be protected from rain and moisture.
How to install the Akku in the device?
To install the Akku, press the Rasttaste (b) and slide the Akku (a) into the Akkuaufnahme. Ensure the Rasttaste clicks into place. For removal, reverse the process. Always ensure the Akku is properly seated for safe operation.
What should I do if the lamp is not working?
If the lamp is not working, first check if the Akku is properly installed and charged. If the Akku is fully discharged, it needs to be recharged. If the issue persists, contact the service center or send the charger and Akku for inspection.
How to clean the lamp?
To clean the lamp, use a dry cloth or compressed air to keep the vents and motor housing free from dust. Avoid using cleaning agents or solvents, as they may damage the plastic parts. Ensure no water enters the device, as it can increase the risk of electric shock.
What should I do with the old battery or device?
Old batteries or devices should not be disposed of in household waste. They should be returned to designated collection points for recycling. If you are unsure where to take them, contact your local municipality for information on proper disposal and recycling options.
What are the safety precautions when using the lamp?
Always read the safety instructions carefully before using the lamp. Keep the device away from children and ensure it is not used in wet conditions. Do not attempt to disassemble the device. If the lamp is not working, do not use it until it has been inspected by a qualified service technician.