Leica Rod Eye Basic (162 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do you set the units of measure on the detector?
The units of measure can be set by pressing the Units of Measure Switch. Options include millimeters (MM), centimeters (CM), inches (IN), fractions of an inch (FRAC), or feet (FT). This allows the user to select the preferred unit for elevation readings.
What does the LED brightness setting control?
The LED brightness setting controls the intensity of the LED indicators on the detector. It can be set to bright, normal, or off, and is adjusted by pressing the Units and Audio switches together.
How do you enter the menu functions?
To enter the menu functions, press the Accuracy and Audio switches together for 2 seconds. This allows access to settings such as sensitivity and averaging, which are detailed in the menu section.
What is the purpose of the strobe rejection feature?
The strobe rejection feature is designed to eliminate unwanted signals from strobe lights, ensuring accurate readings by filtering out interference that could affect the detector's performance.
How does the capture function work?
The capture function allows users to save and display an elevation reading. If the detector is in the laser beam, pressing the capture switch saves the reading as a flashing number. If not in the beam, the user has five seconds to position the detector in the beam to save the reading.
What does the out of beam display indicate?
The out of beam display shows the direction to move the detector to return to the laser beam if it is moved out of range. This feature can be enabled or disabled through the menu settings.
How do you adjust the sensitivity settings?
Sensitivity settings can be adjusted through the menu functions. Options include high (HI), medium (MD), and low (LO). High is for weak beams or long distances, while low reduces interference from external sources.
What is the function of the level vial on the detector?
The level vial helps keep the rod plumb when taking readings. It ensures the detector remains level, which is essential for accurate elevation measurements.
How do you install the batteries in the detector?
The detector uses two AA alkaline batteries, which should be installed in the battery compartment as shown in the diagram. To open the compartment, use a coin to release the tab, and ensure the batteries are placed in the correct positions.
What is the purpose of the offset notch on the detector?
The offset notch is used to transfer reference marks and is located 80 mm below the top of the detector. It is useful for special applications where information needs to be displayed above grade, especially when going below grade is not required.