HighLine Premium LED 80 (94 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to mount the LED light with the universal adapter?
To mount the LED light with the universal adapter, first loosen the fixing screws on both sides. Slide the universal adapter to the desired length and tighten the fixing screws. Place the LED light on the edge of the aquarium.
How to mount the LED light with the swing adapter?
To mount the LED light with the swing adapter, first loosen the fixing screws on both sides and remove both universal adapters. Unscrew the holder from the universal adapter and attach it to the swing adapter. Insert the swing adapter, slide it to the desired length, and tighten the fixing screws. Place the LED light on the edge of the aquarium.
How to mount the LED light with the rope suspension set?
To mount the LED light with the rope suspension set, first loosen the fixing screws on both sides and slide the universal adapter to the desired length. Attach the screw hooks at the specified distance, hang the rope with the canopy, and secure it. Install the rope holder, adjust the rope length, and fix the rope in place.
What are the technical specifications for HighLine Premium LED?
HighLine Premium LED has the following technical specifications: input voltage is 24 V DC, light output varies depending on color (white 4000 K, white 6000 K, red, blue), beam angle is 120°, power consumption ranges from 45 W to 120 W, and it has an IP68 waterproof rating. The dimensions and weight vary based on the model.
How to connect the LED light to the power supply?
To connect the LED light, use the EAC Transformer (available as part of the accessories). Ensure the maximum power rating of the transformer is not exceeded. If multiple lights are used, connect them via the EAC Y-Adapter. Always connect the transformer to the power supply before turning on the unit.
What should I do if the LED light is not working?
If the LED light is not working, check that it is properly connected to the power supply. Ensure the EAC Transformer is connected to the mains. If the light still does not work, the LED light may be defective and should be replaced.
How to clean the LED light?
To clean the LED light, use clean water and a soft brush. Avoid using any chemical cleaning agents, as they can harm plants, animals, and the environment. For removing limescale, OASE PumpClean is recommended.
How to dispose of the LED light?
Do not dispose of the LED light as regular household waste, as it contains electronic components. Make the unit unusable by cutting the cables and dispose of it through the designated recycling system.
What safety precautions should I take when using the LED light?
Always ensure the unit is disconnected from the power supply before performing any maintenance or repairs. Avoid looking directly into the light source, as it can cause eye damage. Protect the plug connections from moisture and never connect or disconnect cables under load.
What are the recommended accessories for the LED light?
Recommended accessories include the EAC Transformer, EAC Y-Adapter, Swing Adapter, Rope Suspension Set, and IR Control Set. These accessories allow for flexible installation, multiple light operation, and remote control of the LED light.