SICK WL34 (164 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to mount the sensor and reflector?
Mount the sensor and reflector on suitable mounting brackets. Ensure proper alignment between the sensor and reflector. Always observe the maximum allowable torque of 2 Nm when tightening.
What is the maximum allowable torque for the sensor?
The maximum allowable torque for the sensor is 2 Nm. Ensure that this limit is not exceeded during installation to avoid damage to the device.
What are the electrical installation requirements?
Install the device using a safe isolation transformer with a secondary overcurrent protection device compliant with UL 248. Use a Class 2 power supply if applicable. Ensure all wiring is done in a de-energized state and follow proper safety procedures.
What are the safety precautions for electrical installation?
Always work on de-energized circuits. Connect and disconnect electrical connections only when the power is off. Ensure the wiring is done by a qualified electrician. Avoid short circuits by isolating exposed conductors and using proper insulation.
What are the pin assignments for the device?
The pin assignments include: BN = brown, WH = white, BU = blue, BK = black, n.c. = not connected, Q = digital output, TE/Test = test input, Alarm = alarm output, L+ = supply voltage, M = ground. Refer to the specific pinout tables for detailed connections.
What are the electrical specifications for the WL34-Bxxx model?
The WL34-Bxxx model operates on a DC voltage range of 10 to 30 V. The output current is up to 100 mA for both PNP and NPN configurations. Ensure the wiring cross-section is between 0.14 and 1.5 mm² for proper performance.
What are the electrical specifications for the WL34-Rxxx model?
The WL34-Rxxx model supports both AC and DC voltages ranging from 20 V to 250 V. It includes relay outputs for control applications. Ensure the wiring cross-section is between 0.14 and 1.5 mm² for reliable operation.
How to ensure proper IP protection for the device?
To ensure the IP protection rating, make sure all connected cables are securely fastened and the device enclosure is properly sealed. Avoid exposing the device to direct UV radiation or weather conditions that may compromise its protection.
What are the safety warnings for the device?
The device is not classified as a safety-related component under the EU Machinery Directive. Always follow the safety instructions provided in the manual to avoid potential hazards during installation and operation.
What should be done after completing the electrical connections?
After completing all electrical connections, verify the wiring and ensure there are no short circuits or loose connections. Only then apply the power supply to the device to avoid damage or malfunction.
Related products from SICK
W9-3
User manual 54 pages
W9-3
User manual 144 pages
LFP Inox
User manual 116 pages
LFP Inox
User manual 56 pages
WTB4-3P2100S13
User manual 38 pages
WL12G-3P3572S12
User manual 48 pages
WLA12L
User manual 212 pages
WE34
User manual 164 pages
WS34
User manual 131 pages
WS34
User manual 164 pages
WTF12L
User manual 232 pages
WTF12V
User manual 232 pages
OLS20
User manual 4 pages
PowerProx - WTT12L
User manual 70 pages
PowerProx - WTT12L
User manual 93 pages
PowerProx - WTT12L
User manual 140 pages
PowerProx - WTT12L
User manual 164 pages
RAY10
User manual 144 pages
RAY10
User manual 166 pages
RAY10
User manual 184 pages