Log in


or


google Continue with Google

Already have an account?

Lutron Energi Savr Node (84 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product description:

The Lutron Energi Savr Node is a lighting control device designed for energy-efficient management of lighting systems. It allows for automated control of lights based on occupancy and ambient light levels, contributing to reduced energy consumption. The device is compatible with various lighting systems and can be integrated into existing control networks. It features a compact design and is suitable for both residential and commercial applications. The Energi Savr Node supports dimming capabilities and can be programmed to meet specific lighting requirements.

Frequently Asked Questions

What is the operating voltage for the Energi Savr NodeT with EcoSystemR?

The Energi Savr NodeT with EcoSystemR operates on a control power of 220-240 V~ at 50/60 Hz with a current draw of 100 mA. It is important to ensure the correct voltage is applied to avoid damage to the unit.

How many ballasts can be connected to each ECO link?

Each ECO link can support up to 64 ballasts or other controllable illumination drivers. The total number of ballasts across both links is limited to 128, making it suitable for large-scale lighting control systems.

What is the maximum length of ECO link wiring for different wire gauges?

The maximum length of ECO link wiring depends on the wire gauge used. For 1.0 mm² wire, the maximum length is 829 meters, while for 2.5 mm² it is 518 meters, 1.5 mm² is 311 meters, and 2.0 mm² is 207 meters.

What are the recommended wire sizes for ECO link wiring?

For ECO link wiring, the recommended wire sizes range from 1.0 mm² to 4.0 mm². The insulation should be stripped to 6.0 mm, and the installation torque should be set to 0.5 N·m to ensure proper and safe connections.

How many input groups are supported by the Energi Savr NodeT with EcoSystemR?

The Energi Savr NodeT with EcoSystemR supports up to four input groups. Each group is wired in the same manner and can be used for different sensors or control devices, allowing for flexible system configurations.

What is the maximum number of QS devices that can be connected to the system?

The system can support up to 100 QS devices and 100 zones. The Energi Savr NodeT with EcoSystemR unit occupies one device position and can manage up to 100 zone positions, making it suitable for complex lighting control setups.

How should the Energi Savr NodeT with EcoSystemR unit be mounted?

The Energi Savr NodeT with EcoSystemR unit should be mounted on a DIN rail with the directional arrows on the label pointing upwards. It is important to ensure the unit is easily accessible for service or troubleshooting, and to follow local electrical codes during installation.

What is the recommended method for connecting multiple Energi Savr NodeT with EcoSystemR units?

To connect multiple Energi Savr NodeT with EcoSystemR units into a single system, use the QS link with pins 1, 3, and 4 only. This allows for expansion of the system while maintaining proper communication between units.

How do you verify that the EcoSystemR lights are connected to the correct ECO links?

To verify the connection, enter Test mode by pressing and holding the Test Button until the Test LED starts flashing. Use the ECO 1 and ECO 2 buttons to cycle through different lighting states for each link, ensuring the lights respond as expected.

What is the recommended Ethernet connection setup for programming the Energi Savr NodeT with EcoSystemR?

For programming, it is recommended to install a dedicated Ethernet wall jack near the unit for easy access. An Ethernet connection can be made via the integral Ethernet jack, and a wireless router is optional but recommended for mobile device programming.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.