IGEBA TF 35 (27 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the operating frequency of the fog generator?
The fog generator operates at an approximate working frequency of 100 Hz. This frequency allows for efficient mixing and dispersion of solutions through acoustic oscillations within the system.
How does the fog generator work?
The fog generator functions using a one-sided open jet tube (Schmidt-Argus Tube) with an inlet valve (carburetor) and an open outlet. This setup, including components like the carburetor, mixer tube, combustion chamber, and resonator, creates acoustic oscillations that facilitate gas exchange processes.
What is the maximum solution output rate?
The fog generator can deliver a solution output of up to 42 liters per hour. This range allows for various applications depending on the required coverage and intensity.
How do I adjust the solution flow rate?
To set the desired solution output, use different nozzles with specified flow rates (e.g., 10 l/h to 42 l/h). Ensure you select only those jets compatible with your model and test under actual conditions for optimal performance.
What safety precautions should I take when using the fog generator?
Always wear ear protection due to noise levels reaching up to 90 dBA. Avoid operating in enclosed spaces without proper respiratory equipment, especially with flammable or volatile substances. Never leave the unit unattended and ensure it is equipped with an emergency shut-off device.
What are the technical specifications of the fog generator?
The TF 35 model has a combustion chamber power of approximately 18.7 kW, consumes about 2 liters per hour of fuel, and can hold up to 10 liters of solution. It operates at pressures around 0.25 bar in the solution tank and weighs roughly 8.8 kg when empty.
How do I prepare the fog generator for use?
Before starting, ensure all components are properly assembled: insert batteries according to the diagram, fill the fuel and solution tanks with appropriate substances, secure any protective guards, and check that no leaks or spills occur during setup.
How do I start the fog generator?
To initiate operation, pull up the stop button, press and hold the starter button while operating the air pump regularly. Allow the unit to warm up for about a minute before starting the solution flow to ensure proper function.
How do I shut down the fog generator safely?
To turn off the device, close the solution tap partially to clear any residual liquid from the system, wait until no more fog is emitted, and then fully close it. Use the air pump a few times with the starter button pressed simultaneously to release remaining gases.
How should I clean the fog generator?
Clean all solution-carrying parts weekly or after each use if water-based solutions are used. Flush the system with about 1/4 liter of water, then operate it briefly to clear any blockages. For deeper cleaning, disassemble and use a pipe cleaner tool on components like the resonator and mixing chamber.