afx light SHOOTER-LED (91 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What should I do if the product is damaged during shipping?
If any parts appear damaged or the carton shows signs of mishandling, notify the freight company immediately and retain the packing materials for inspection. Keep the carton and all packing materials in case the fixture needs to be returned to the factory.
What is the maximum ambient temperature for operation?
The maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this to avoid damage or malfunction.
How should I install the fixture to ensure safety?
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Ensure no ventilation slots are blocked. Always secure the fixture to a fastening device using a safety chain and never carry it solely by its head.
What type of fuse should I use for the unit?
Always use the same type and size of fuse when replacing. Disconnect the power source before servicing or replacing the fuse to prevent risk of fire or electric shock.
How do I set up a DMX serial data link?
Connect the DMX cable from the controller to the first fixture, then daisy chain the fixtures in a single line. Ensure the last fixture has a terminator for longer cable runs. The maximum recommended distance is 100 meters (1640 ft.) and up to 16 fixtures can be connected.
How do I configure the DMX channel mode?
Press the MENU button until 'CHND' is displayed, then select either '10CH' or '13CH' using the UP or DOWN buttons. Confirm your selection by pressing ENTER.
How do I set the DMX address for the fixture?
Press the MENU button until 'ADDR' is displayed, then use the UP or DOWN buttons to select your desired DMX address. Confirm your selection by pressing ENTER and connect your DMX controller.
How do I select the show mode?
Press the MENU button until 'SHND' is displayed, then use the UP or DOWN buttons to select a show mode from SH 0 to SH 7. Confirm your selection by pressing ENTER and hold the MENU button for at least three seconds to activate the change.
How do I adjust the sound sensitivity?
Press the MENU button until 'SENS' is displayed, then use the UP or DOWN buttons to adjust the sound sensitivity from 0 (least sensitive) to 100 (most sensitive). Confirm your selection by pressing ENTER.
How do I reset the unit to factory settings?
Press the MENU button until 'Reset' is displayed, then press ENTER. The unit will reset itself to its default settings, which can be useful if you need to restore the original configuration.
Related products from afx light
BLADE8-FX
User manual 16 pages
16-2803
User manual 16 pages
BARLED18-PIX
User manual 16 pages
TLIGHT-RGBW
User manual 16 pages
SPARKULAR-MINI
User manual 19 pages
CITYCOLOR400
User manual 18 pages
16-2046
User manual 20 pages
CLUB-KALEDO
User manual 20 pages
COMBO-LED
User manual 19 pages
SPOT180LED
User manual 27 pages
PARLED100-Z
User manual 20 pages
HAZE800
User manual 20 pages
MUSHROOM-2.0
User manual 20 pages
COMBOLED-RB
User manual 21 pages
WATERBAR
User manual 22 pages
PIXCOLOR
User manual 23 pages
CLUB-MIX3
User manual 24 pages
CLUB-MIX2
User manual 24 pages
16-2047
User manual 24 pages
CLUB-WHITE450
User manual 24 pages