Cameo FLAT MOON (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to set the DMX start address?
To set the DMX start address, press the MODE button repeatedly until 'Addr' appears on the display. Press ENTER to activate DMX control and view the current DMX start address. Use the UP and DOWN buttons to configure the desired DMX start address and press ENTER to confirm. Successful entry is confirmed when the display disappears for approximately one second.
How to configure DMX operating modes?
To configure DMX operating modes, press the MODE button repeatedly until 'ChAn' appears on the display. Press ENTER, then use the UP and DOWN buttons to select one of the four available DMX modes (Ch03, CH05, CH09, CH22). Confirm your selection by pressing ENTER. Successful entry is confirmed when the display disappears for approximately one second.
How to use the automatic control mode?
To use the automatic control mode, press the MODE button repeatedly until 'Auto' appears on the display. Press ENTER to select from four different programme categories (rGbu = RGB+UV LEDs, Str = strobe, rGb = centre LED, MiX = combination). Use the UP and DOWN buttons to select the desired programme and set the speed (S 01 = minimum speed, S 99 = maximum speed). Confirm with ENTER. Successful entry is confirmed when the display disappears for approximately one second.
How to use the sound control mode?
To use the sound control mode, press the MODE button repeatedly until 'Soun' appears on the display. Press ENTER to select from four different programme categories (rGbu = RGB+UV LEDs, Str = strobe, rGb = centre LED, MiX = combination). Use the UP and DOWN buttons to select the desired programme. The sensitivity to sound can be adjusted using the MIC SENSITIVITY control. Turn anti-clockwise to reduce sensitivity and clockwise to increase sensitivity.
How to adjust the colour mix?
To adjust the colour mix, press the MODE button repeatedly until 'CoLo' appears on the display. Press ENTER, then use the UP and DOWN buttons to adjust the brightness of the red LEDs (r000–r100). Confirm with ENTER. The brightness of the green, blue, and UV LEDs can be adjusted in the same way (G000–G100, b000–b100, U000–U100). Confirm your entry with ENTER. Successful entry is confirmed when the display disappears for approximately one second.
How to use the slave mode?
To use the slave mode, press the MODE button repeatedly until 'SLAV' appears on the display. Press ENTER to activate slave mode. Successful entry is confirmed when the display disappears for approximately one second. Connect the slave and master units with a DMX cable (Master = DMX OUT, Slave = DMX IN) and enable one of the standalone modes on the master unit (automatic-control, sound-control, or colour mix). The slave unit will then follow the master unit.
How to configure the system settings?
To configure the system settings, press the MODE button repeatedly until 'SYSt' appears on the display. Press ENTER, then use the UP and DOWN buttons to select the desired menu item and edit it as required. Successful entry is confirmed when the display disappears for approximately one second.
How to use the IR remote control?
To use the IR remote control, aim it directly at the infrared sensor on the front of the lamp. The maximum range is approximately 8 metres. The blackout button can be used to switch off the effects LEDs, strobe, and centre LED regardless of the operating mode. The auto programme button allows you to cycle through different programme categories (rGbu, Str, rGb, MiX) and set the speed using + and -.
How to set the microphone sensitivity?
To set the microphone sensitivity, use the MIC SENSITIVITY control. Turn anti-clockwise to reduce sensitivity and clockwise to increase sensitivity. This setting affects how the sound programmes react to bass impulses. Adjust the sensitivity according to your needs for optimal performance.
How to ensure safe installation?
To ensure safe installation, use only sufficiently stable and compatible stands or mounts. Make sure wall mounts are properly installed and secured. Keep a minimum distance of 20 cm around and above the device. Avoid placing sources of ignition near the equipment. Ensure that the equipment is installed in a well-ventilated area and not exposed to flammable materials or direct sunlight.
Related products from Cameo
CLF2FC
User manual 108 pages
CLMPAR3
User manual 52 pages
CLMPAR3
User manual 184 pages
CLMPARCOB1
User manual 56 pages
CLMPARCOB1
User manual 184 pages
HYDRABEAM 100
User manual 36 pages
LED MINI PAR CAN
User manual 100 pages
PAR 56 CAN
User manual 86 pages
PAR 56 CAN
User manual 86 pages
CLFLOODIP65TRI
User manual 44 pages
CLFLOODIP65TRI
User manual 40 pages
FLAT PRO FLOOD IP65 TRI
User manual 40 pages
FLAT PRO FLOOD IP65 TRI
User manual 44 pages
PAR 56
User manual 40 pages
FLASH BAR 150
User manual 40 pages
CLSTORM
User manual 40 pages
CLSTORM
User manual 136 pages
CLVOODOO
User manual 40 pages
VOODOO
User manual 40 pages
CLLWOOKIE150G
User manual 44 pages