Futurelight MH-860 (101 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to replace the lamp?
To replace the lamp, ensure the device is completely powered off and disconnect the power supply. Remove the screws X, Y, and Z to access the lamp compartment. Allow at least 15 minutes for the lamp to cool down before handling. Insert the new lamp carefully, ensuring it is securely seated. Adjust the lamp position using screws A, B, and C for optimal focus and light distribution.
How to adjust the lamp position?
Adjust the lamp position by turning screws A, B, and C. Ensure the lamp is centered and the light beam is evenly distributed. If the hotspot appears too bright, move the lamp closer to the reflector. If the light is brighter at the edges, move the lamp away from the reflector. Always allow the lamp to cool before making adjustments.
What are the beam angles for the MH-860?
The MH-860 projector offers three beam angles: 15°, 18°, and 22°. These angles determine the spread of the light beam and can be adjusted using the control board. The beam opening varies depending on the selected angle, affecting the coverage and intensity of the light output.
How to install or replace gobos?
To install or replace gobos, power off the device and disconnect the power supply. Open the housing cover by removing the cross-head screws on the front and back. For static gobos, gently press the desired gobo out of the holder, ensuring not to bend the clips. For rotating gobos, remove the snap ring with a suitable tool, replace the gobo, and secure the snap ring back in place.
What safety precautions should be taken during installation?
During installation, ensure the device is powered off and disconnected from the power supply. Use proper lifting equipment and avoid direct contact with the projector's hot surfaces. Ensure the installation area is free from flammable materials and maintain a minimum distance of 0.5 meters. Always use a secondary suspension system and avoid working near moving parts or high places.
What are the technical specifications of the MH-860?
The MH-860 features a multi-functional moving head with two color wheels, a dichroic filter system, and rotating gobos. It supports DMX-512 control with 16 channels for pan/tilt movement. The device includes a built-in analyzer for error detection, a motorized focus, and a 3-facet prism with high-speed rotation. It is compatible with various lamps and offers a range of special effects and control functions.
How to control the projector remotely?
The MH-860 can be controlled remotely using a DMX-512 controller. Connect the DMX output to the controller and use the control board to adjust settings such as pan/tilt movement, focus, and gobos. The device supports 16-bit resolution for smooth movement and includes a 4-digit LED display for monitoring and adjusting special functions.
What are the special functions of the MH-860?
The MH-860 includes special functions such as a blackout mode when moving the head or selecting gobos, a macro function for combining rotating gobos and prisms, and a programmable strobe effect with 1-10 flashes per second. It also features a built-in analyzer for troubleshooting, a motorized focus, and a 3-facet prism for dynamic light effects.
What is the maximum ambient temperature for the MH-860?
The maximum ambient temperature for the MH-860 should not exceed 40°C. Ensure the device is installed in a well-ventilated area and maintain a minimum distance of 0.5 meters from flammable materials. Avoid exposing the projector to excessive heat, moisture, or dust to prevent damage and ensure optimal performance.
How to maintain the projector for longevity?
To maintain the MH-860 for longevity, allow the lamp to cool for at least 15 minutes before handling. Regularly inspect the projector for signs of wear or damage and clean the lens and housing as needed. Avoid frequent on/off cycles to prolong the lamp life. Ensure the device is properly secured during installation and use a secondary suspension system for safety.
Related products from Futurelight
DJ-SCAN 200
User manual 24 pages
Scan H - 150
User manual 23 pages
ODD
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 28 pages
PRO Slim PAR-6 COB RGB
User manual 24 pages
PRO Slim PAR-36 CW
User manual 28 pages
EYE-54 TCL
User manual 28 pages
OCC-36 K2 3W RGB IP65
User manual 30 pages
PPP-60
User manual 30 pages
PRO Slim Strobe SMD 5630
User manual 31 pages
PRO Slim PAR-18 TCL
User manual 31 pages
PRO Slim PAR-7 HCL
User manual 32 pages
POS-12 LED QCL POWERSTICK
User manual 34 pages
POS-12 LED QCL POWERSTICK
User manual 40 pages
PCT-4000
User manual 35 pages
MH-660
User manual 100 pages
PCT-3200
User manual 36 pages
POS-6 SCAN LED QCL
User manual 36 pages
POS-12 SCAN LED QCL
User manual 36 pages