Futurelight PHS-250 (75 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to replace the lamp?
To replace the lamp, ensure the device is completely powered off and cooled down. Use appropriate protective gear, including safety glasses, gloves, and a helmet. Remove the lamp cover, take out the lamp holder, and carefully insert the new lamp. Secure the holder and adjust the lamp position as needed for optimal light distribution.
How to adjust the lamp?
Adjust the lamp by turning screws A, B, and C to center the 'hot spot' of the light beam on a flat surface. If the light is too intense, move the lamp closer to the reflector. If the light is uneven, adjust the screws to achieve a balanced output. Always ensure the lamp is properly secured after adjustment.
What safety precautions should be taken during installation?
During installation, ensure the device is placed outside the reach of people. Use proper rigging systems and never allow the projector to swing freely. Always use a safety lanyard for overhead installations, and ensure the mounting surface can support at least 10 times the weight of the device. Avoid placing flammable materials within 0.5 meters of the projector.
What is the maximum ambient temperature for the device?
The maximum ambient temperature for the device is 45°C. Exceeding this temperature can damage the internal components and reduce the lifespan of the device. Ensure proper ventilation and avoid operating the device in excessively hot environments.
What type of lamp is required for the PHS-250?
The PHS-250 requires a MSD/HSD 200 GY-9.5, MSD/HSD 250 GY-9.5, or MSD 250/2 GY-9.5 lamp. Always use the specified lamp type to avoid overheating and potential damage to the device. Never use a lamp with a higher power rating than specified.
How to secure the projector during overhead installation?
For overhead installation, use a safety lanyard rated for at least 12 times the weight of the device. Attach the lanyard to the designated hole in the base plate and secure it through a safe mounting point. Ensure the lanyard is properly fastened and never use it as an open loop. The maximum fall distance should not exceed 20 cm.
What are the technical specifications of the PHS-250?
The PHS-250 features 14 DMX channels with 16-bit resolution for pan/tilt movement, 12 DMX channels with 8-bit resolution, and a 4-digit LED display for start address. It supports 8 dichroic colors plus white, a Gobo wheel with 6 rotating metal gobos, and a static Gobo wheel with 7 metal gobos. The device also includes a motorized focus, strobe effect, and a rotating 3-facet prism.
How to connect the projector to a DMX-512 controller?
Connect the projector to a DMX-512 controller using the DMX input and output ports. Ensure the controller is compatible with DMX-512 protocol and set the correct start address. Use a reliable DMX cable and verify the connection by testing the projector's functions. Always follow the manufacturer's guidelines for proper setup.
What should be done if the device is not working correctly?
If the device is not functioning properly, it may be due to improper handling or incorrect settings. Check all connections, ensure the device is properly powered, and verify that the DMX settings are correct. If the issue persists, consult a qualified technician to avoid further damage and ensure safe operation.
How to maintain the projector for long-term use?
Regularly inspect the device for signs of wear or damage, especially the power cable and connections. Keep the device clean and free from dust, and ensure proper ventilation to prevent overheating. Replace the fuse if it is damaged or blown, and always use the original packaging for transport to avoid damage. Follow the manufacturer's maintenance schedule for optimal performance.
Related products from Futurelight
DJ-SCAN 200
User manual 24 pages
Scan H - 150
User manual 23 pages
ODD
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 28 pages
PRO Slim PAR-6 COB RGB
User manual 24 pages
PRO Slim PAR-36 CW
User manual 28 pages
EYE-54 TCL
User manual 28 pages
OCC-36 K2 3W RGB IP65
User manual 30 pages
PPP-60
User manual 30 pages
PRO Slim Strobe SMD 5630
User manual 31 pages
PRO Slim PAR-18 TCL
User manual 31 pages
PRO Slim PAR-7 HCL
User manual 32 pages
POS-12 LED QCL POWERSTICK
User manual 34 pages
POS-12 LED QCL POWERSTICK
User manual 40 pages
PCT-4000
User manual 35 pages
MH-660
User manual 100 pages
PCT-3200
User manual 36 pages
POS-6 SCAN LED QCL
User manual 36 pages
POS-12 SCAN LED QCL
User manual 36 pages