Futurelight PSX-250 (102 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to replace the lamp?
To replace the lamp, ensure the device is completely powered off and the power plug is removed. Use a MSD/HSD 200 GY-9.5, MSD/HSD 250 GY-9.5, or MSD 250/2 GY-9.5 lamp. Always wear protective gear including safety glasses, gloves, and a helmet with a visor. Allow the lamp to cool down for about 10 minutes before handling. Never touch the glass body with bare hands. Replace the lamp only if it is damaged or has deformed due to heat. Do not use lamps with higher power ratings than specified, as they can cause overheating and void the warranty.
How to adjust the lamp?
Adjust the lamp by turning the screws '1, 2, 3' to center the 'hot spot' (the brightest part of the light beam) on a flat surface like a wall. If the hot spot is too bright, move the lamp closer to the reflector by turning the screws 45° clockwise. If the light is brighter at the edges, move the lamp away from the reflector by turning the screws 45° counterclockwise. Ensure the light is evenly distributed for optimal performance.
How to change the gobos?
To change the gobos, ensure the device is powered off and the power plug is removed. Use the Slot In Gobo System for tool-free replacement. Remove the snap ring with an appropriate tool, take out the old gobo, and insert the new one. Press the snap ring back into place. For metal gobos, ensure the mirrored side faces the lamp. For glass gobos, ensure the coated side faces away from the lamp. Always follow the instructions for proper installation.
What is the minimum distance from the light source?
The minimum distance from the light source to the illuminated object must not be less than 0.5 meters. This is indicated by the symbol on the device. Ensure the device is installed at a safe distance to avoid overheating and potential hazards.
What are the operating temperature and humidity limits?
The operating temperature must be between -5°C and +45°C. The relative humidity must not exceed 50% at 45°C. The device must be used in an environment with a height between -20 and 2000 meters above sea level. Avoid high humidity or moisture exposure, as it can reduce insulation and lead to electric shocks. Ensure the device is not exposed to rain, splashing water, or high humidity environments.
Can the device be used outdoors?
The device is not designed for outdoor use. It is intended for indoor applications only. Avoid using the device in environments with rain, splashing water, or high humidity. Ensure the device is not exposed to direct sunlight or heat sources, as this can affect performance and safety.
What safety precautions should be taken when using the device?
Never look directly into the light source, as it can trigger epileptic seizures in sensitive individuals. Keep children and untrained individuals away from the device. Do not operate the device unattended. Ensure the device is powered off and the power plug is removed before performing any maintenance or adjustments. Avoid using the device during thunderstorms to prevent electrical surges. Clean the device with a dry cloth only and never use chemical solvents.
What are the features of the device?
The device is a professional scanner with rotating gobos, featuring 8 dichroic colors plus white, color switching modes, rainbow effects, a slot-in gobo system, two gobo wheels (one with 6 rotating gobos and one with 7 static metal gobos), a rotating 3-facet prism, macro function, motorized focus, mechanical dimmer, strobe effect, 16-bit resolution for pan/tilt movement, a control board with a 4-digit display, and DMX-512 control capabilities. It supports both DMX-controlled and standalone operation with 48 pre-programmed scenes.
How to secure the projector during installation?
The projector must always be secured with an appropriate safety harness. Ensure the installation area is clear and the device is not obstructed. Maintain a minimum clearance of 50 cm around the device for proper ventilation. Avoid placing the device near heat sources or direct sunlight. Ensure the device is installed at a safe height and distance from any flammable materials.
What should I do if the device is damaged or not functioning properly?
If the device is not functioning properly, it is likely due to improper handling or misuse. Always refer to the user manual for troubleshooting steps. If the device has been exposed to moisture, dust, or physical damage, it should be inspected by a qualified technician. Never attempt to repair the device yourself unless you are trained and have the appropriate tools. Always ensure the device is powered off and the power plug is removed before performing any maintenance.
Related products from Futurelight
SC-240 Scanner
User manual 54 pages
DJ-SCAN 200
User manual 24 pages
Scan D-200
User manual 18 pages
Scan H - 150
User manual 23 pages
ODD
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 24 pages
PRO Slim PAR-12 MK2 CW/WW/A
User manual 28 pages
PRO Slim PAR-6 COB RGB
User manual 24 pages
PRO Slim PAR-36 CW
User manual 28 pages
EYE-54 TCL
User manual 28 pages
OCC-36 K2 3W RGB IP65
User manual 30 pages
PPP-60
User manual 30 pages
PRO Slim Strobe SMD 5630
User manual 31 pages
PRO Slim PAR-18 TCL
User manual 31 pages
PRO Slim PAR-7 HCL
User manual 32 pages
POS-12 LED QCL POWERSTICK
User manual 34 pages
POS-12 LED QCL POWERSTICK
User manual 40 pages
PCT-4000
User manual 35 pages
MH-660
User manual 100 pages
PCT-3200
User manual 36 pages