Snap-On CTLUH861 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
Can the light be used in explosive atmospheres?
Do not operate lights in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
What should I do if the light malfunctions?
If the light malfunctions, discontinue use and immediately arrange for service and repair. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
How long does the battery last?
The bulb life is 50,000 hours. The operating temperature range is from -4°F (-20°C) to 140°F (60°C). The battery pack can provide up to 1000 charge/discharge cycles.
What is the charging temperature range for the battery?
The charging temperature range for the battery is 32°F (0°C) to 113°F (45°C). The charger will not charge if the battery pack is too hot or too cold.
How do I charge the battery pack?
To charge the battery pack, insert it into the charger and connect the charger to an AC power source. The charger is equipped with a 4-LED fuel gauge that indicates the state of charge. When the battery makes contact, all 4 green LEDs on the fuel gauge will flash twice and then the charger will step through the 4 LEDs and stop at the one flashing green LED that signifies the battery state of charge and that the battery is charging.
What should I do if the battery is faulty?
A flashing red LED indicates the battery is faulty and the charger will not charge. Remove the battery from the charger and replace the battery. Do not attempt to disassemble or destroy the battery pack.
Can I use the light in cold weather?
The Lithium-Ion battery can be used in temperatures down to -4°F (-20°C). When the battery pack is very cold, run the tool at no load to warm the battery and then use the tool normally.
What are the specifications for the battery pack?
The battery pack specifications include a voltage of 14.4 VDC, a capacity of 2.0 Ah or 2.5 Ah, and a discharge temperature range of -4°F (-20°C) to 140°F (60°C). The battery pack weighs approximately 0.5 lbs (0.25 kg).
How do I maintain the light?
Maintain the light by keeping it dry, clean, and free of oil and grease for better and safer performance. Always check the light for damaged parts before use and replace or repair damaged parts before use. Check alignment of moving parts and ensure they are not binding or broken.
Where can I get service for the light?
Have your light serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the light is maintained. For the location of the nearest Snap-on repair center, call Snap-on customer service at 1-877-762-7664 (North America Only).