Baumer CombiLyz AFI4 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the input voltage for CombiLyz AFI4/AFI5?
The CombiLyz AFI4/AFI5 requires an input voltage of 15 to 35 Vdc, with a power consumption of up to 150 mA.
What are the output signals for conductivity and temperature?
The device provides two 4…20mA outputs: one for conductivity/concentration measurement and another for temperature monitoring using a Pt100 sensor.
How does inductive conductivity measurement work?
Inductive conductivity is measured by passing an AC signal through the primary coil, which induces current in the liquid. The secondary coil measures this induced current to determine conductivity levels while the Pt100 sensor compensates for temperature variations.
What are the operating temperatures for ambient and process conditions?
The device operates within an ambient temperature range of -20…+85 °C, with a maximum process temperature tolerance up to +140 °C.
How should the sensor be mounted in a pipe or vessel?
Mounting must ensure full submersion and orientation aligned with flow direction. The hole through the sensor should face the flow for effective self-cleaning, avoiding turbulent areas within 1 meter of bends.
What is the installation factor and how does it affect measurements?
The installation factor compensates for ion flow disruption caused by pipe walls or tight spaces. It depends on wall distance, conductivity, and diameter; if sufficient space (a > 20 mm) exists, no correction is needed.
How can the display orientation be adjusted?
To adjust the display's facing, open the housing by removing the cover, lift the display, turn it as desired using a 2mm Allen key for screws inside, and reinsert in the preferred position without damaging internal cables.
What are the recommended tightening torques for mounting?
The sensor should be tightened with a torque of between 20 to 25 Nm. Ensure all connections like cable glands or M12 plugs are sealed properly and leak-tightness is verified before operation.
What types of connectors does the device support for electrical connection?
The CombiLyz AFI4/AFI5 supports various connector types including M12, 4-pin; M12-A, 8-pin with IO-Link and HART® compatibility. Each pin has a specific function such as power supply or signal output.
What are the safety precautions for handling hot media?
The sensor housing may reach temperatures over 50°C during operation; therefore, protective measures must be taken when working with hot fluids to prevent burns and ensure safe handling procedures are followed by trained personnel.
Related products from Baumer
GMP 1,0
User manual 2 pages
TDP 13.06
User manual 2 pages
OADR 20I6475/S14F
User manual 40 pages
OADR 20I6585/S14F
User manual 40 pages
OADR 20I6465/S14F
User manual 40 pages
OADR 20I6575/S14F
User manual 40 pages
OADR 20I6565/S14F
User manual 40 pages
ISI36
User manual 16 pages
TA134
User manual 36 pages
TA201
User manual 36 pages
CombiLyz AFI5
User manual 40 pages
CombiLyz AFI5
User manual 68 pages
OADR 20I6485/S14F
User manual 40 pages
NE230
User manual 44 pages
PCD41
User manual 44 pages
OADM 20I6591
User manual 48 pages
OADM 20I6592
User manual 48 pages
OADM 20I6593
User manual 48 pages
TA202
User manual 52 pages
NE212
User manual 64 pages