Chauvin Arnoux AmpFLEX A110-045 (112 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum voltage rating for the A110 in category IV?
The A110 is protected against voltages not exceeding 600 V with respect to earth in category IV. This ensures safe operation under low-voltage installation conditions.
What is the maximum voltage rating for the A130 in category III?
The A130 is protected against voltages not exceeding 600 V with respect to earth in category III. This ensures safe operation within building installation environments.
What are the current measurement ranges for the A110?
The A110 can measure alternating currents from 3 A to 3000 A for the 45 cm and 80 cm models, and from 30 A to 30,000 A for the 120 cm model. These ranges are converted into proportional alternating voltages.
How do you connect the A110 to a measuring device?
Connect the output cables to a measuring device with an input impedance of at least 1 MW. Turn the switch to a position to power on the electronic housing, and ensure the device is set to AC voltage measurement mode.
What is the purpose of the overload indicator on the A110?
The red OL indicator signals that the measurement range has been exceeded, which can cause electronic saturation and measurement errors. Ensure this light is off for accurate readings.
How do you calibrate the A110 for accurate current measurement?
Use the coefficient of reading indicated on the housing label, which corresponds to the selected range. Multiply the measured voltage by this coefficient to obtain the actual current value.
What is the function of the Auto Power Off feature on the A110?
The Auto Power Off feature turns the device off automatically after 10 minutes of inactivity to conserve battery life. The orange light indicates that this function is active.
How do you disable the Auto Power Off feature on the A110?
To disable the Auto Power Off feature, power on the device by turning the switch to a measurement position while pressing the Auto Power Off button for more than 2 seconds. The orange light will remain off.
What are the current measurement ranges for the A130?
The A130 can measure alternating currents from 30 A to 3000 A. It is designed for three-phase applications and provides proportional alternating voltage outputs for each phase.
How do you connect the A130 to a measuring device?
Connect the output cables to a measuring device, power on the electronic housing by turning the switch, and position the three sensors on the three phases. Ensure the red OL indicator is off for accurate readings.
Related products from Chauvin Arnoux
C.A 846
User manual 24 pages
C.A 846
User manual 24 pages
P01710053
User manual 30 pages
XRGST1
User manual 30 pages
C.A 811
User manual 32 pages
C.A 811
User manual 32 pages
C.A 801
User manual 36 pages
CA 852
User manual 38 pages
CA 7024
User manual 43 pages
F603
User manual 72 pages
3
User manual 44 pages
C177
User manual 44 pages
MN77
User manual 44 pages
MN77
User manual 44 pages
PEL 52
User manual 64 pages
PEL 51
User manual 64 pages
F605
User manual 72 pages
F405
User manual 79 pages
P01140301
User manual 60 pages
C.A 6501
User manual 62 pages