Dräger X-node (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to start the X-node?
To start the X-node, insert a compatible sensor as described in section 4.2. Once the sensor is inserted, the X-node will power on and begin measuring gas levels. The status LED will blink blue, red, and green to indicate startup. If a LoRa connection is configured, the X-node will attempt to connect to the LoRaWAN provider immediately after startup.
What do the status LED colors mean?
The status LED uses different colors to indicate the device's operational status. A blue-green flash indicates a successful startup. A green pulse means the gas concentration is below the warning threshold. A yellow pulse indicates the gas concentration is between the warning and alarm thresholds. A red pulse means the gas concentration has exceeded the alarm threshold. The LED can also pulse or blink based on the display pattern settings, with pulsing being more noticeable but consuming more power.
How to connect the X-node to an app?
To connect the X-node to an app, ensure the sensor is inserted and the device is powered on. The X-node will establish a Bluetooth connection with the app. For a LoRa connection, configure the settings in the app as described in section 5.6.3. Once connected, the X-node will send data to the app and allow remote monitoring and configuration.
What are the alarm thresholds?
The X-node has two alarm thresholds: A1 (warning) and A2 (alarm). These thresholds are pre-set for each sensor but can be customized via the app. If the gas concentration exceeds A1, the status LED will pulse yellow. If it exceeds A2, the LED will pulse red. The alarm thresholds can be adjusted in the app settings under 'Alarmgrenzen einstellen'.
How to change the X-node's name?
To change the X-node's name, use the app to access the device settings. Navigate to the 'Name des X-node ändern' option and enter the new name. The change will be saved and reflected in the app and any connected systems. This allows for easy identification of multiple devices in a network.
How to update the firmware?
To update the firmware, use the app to access the device settings. Navigate to the 'Firmware aktualisieren' option and follow the on-screen instructions. The X-node will download and install the latest firmware, ensuring optimal performance and security. Always ensure the device is connected to a stable power source during the update.
How to calibrate the X-node?
Calibration of the X-node involves using reference gases as described in section 6.3. Prepare the calibration gas supply and follow the steps for zero-point calibration and sensitivity adjustment. The X-node must be calibrated regularly to maintain accuracy, especially after exposure to extreme conditions or prolonged use.
What are the technical specifications?
The X-node has technical specifications that vary depending on the sensor used. When operating with the CO2 sensor 6800482, the device measures CO2 levels continuously. For the NH3 AL sensor 6813735, it measures ammonia levels. Environmental sensors provide temperature, humidity, and pressure data. Refer to section 10 for detailed technical data.
How to replace the sensor?
To replace the sensor, first remove the old sensor by unscrewing the bayonet ring. Insert the new sensor and secure it by tightening the bayonet ring. Ensure the sensor is properly seated and the connection is secure. The X-node will automatically detect the new sensor and begin measuring gas levels. Always use original Dräger sensors to maintain accuracy and reliability.
How to maintain the X-node?
Regular maintenance of the X-node includes replacing the sensor and filter as described in section 9.1 and 9.2. Ensure the device is stored in a dry, temperature-controlled environment to prevent damage. Clean the exterior regularly to avoid dust buildup. Always follow the manufacturer's guidelines for maintenance to ensure optimal performance and longevity.
Related products from Dräger
X-am 5100
User manual 264 pages
X-am 5100
User manual 288 pages
X-am 5100
User manual 252 pages
FG4500
User manual 16 pages
PX4500
User manual 7 pages
Polytron 7500
User manual 8 pages
Polytron 7500
User manual 8 pages
FG7000
User manual 13 pages
Aerotest Alpha
User manual 148 pages
Aerotest Alpha
User manual 256 pages
Aerotest Alpha
User manual 112 pages
Aerotest Alpha
User manual 16 pages
Aerotest Navy
User manual 36 pages
Aerotest Navy
User manual 112 pages
Aerotest Navy
User manual 148 pages
Aerotest Navy
User manual 256 pages
Alcotest 6810 med
User manual 40 pages
Alcotest 6810 med
User manual 40 pages
Alcotest 7410Plus
User manual 45 pages
MiniWarn
User manual 48 pages