Log in


or


google Continue with Google

Already have an account?

ITRON Delta (68 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 2
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The ITRON Delta measuring instrument is designed for precise and reliable measurement tasks. It features a robust construction suitable for use in various industrial environments. The device offers high accuracy and a user-friendly interface, making it easy to operate. It supports multiple measurement modes and provides clear, readable displays. The ITRON Delta is ideal for applications requiring consistent and accurate data collection.

Frequently Asked Questions

What gases can Delta meters measure?

Delta rotary-meters are designed to measure gases from the first, second, and third gas families as defined in EN437. They also handle various filtered and non-corrosive gases.

How should I store a Delta meter before installation?

If not used immediately, store it horizontally in a clean, dry environment under cover. Ensure the inlet and outlet caps remain in place until installed.

What lubricant is recommended for Delta meters?

Choose a neutral, non-detergent lubricant suitable for operating conditions. Refer to Annex 3 for commercial references or consult Itron for other gases.

How do I adjust the oil level in the end covers of a Delta meter?

For general cases, fill until it reaches the lowest sight point. For steel-bodied meters, fill until lubricant flows out from the 'L' level point. Refer to Annex 5 for detailed procedures.

What is required when installing a Delta meter with bypass?

Follow the procedure in Annex 7: start by closing all valves, slowly pressurize downstream piping, open upstream valve gradually, and ensure pressure changes do not exceed 0.3 bar per second.

How should I handle a Delta meter during transportation?

Ensure that lubricant is completely drained from the front and rear covers before shipping or handling to prevent spillage into the measuring chamber. Lift only with belts around the main body or using eyelets.

What are the installation requirements for Delta meters in hazardous areas (ATEX)?

Use intrinsic safe circuits for pulse transmitters, protect exposed aluminum parts from rust, and ensure tools used during installation meet ATEX standards. Avoid flame, ionizing radiation, ultrasound, or strong electromagnetic fields.

What is the recommended filtration level for Delta meters?

A minimum filtration of 100 μm is advised to prevent particle buildup inside the meter. Periodically check and clean filters, especially after installation or maintenance on upstream piping.

How do I perform a start-up procedure without bypass?

Start with all valves closed. Slowly open the upstream valve to pressurize the line, then gradually open the downstream valve while maintaining pressure changes under 0.3 bar per second. Ensure flow is registered and check for leaks.

What maintenance steps are required after initial start-up of a Delta meter?

Check lubricant levels periodically based on gas type: natural gas requires checks every 5-8 years, while other gases may need more frequent assessments. Replace if emulsified or chemically reactive with the gas.

Send answer

Related products from ITRON

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5