Magnescale DK812SBFR (26 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely operate the digital gauge?
Always read and follow the manual before use. Ensure proper installation, avoid exposure to water or oil, and keep the unit away from strong magnetic fields exceeding 5 mT. Disconnect power when connecting/disconnecting connectors.
What are the safety precautions for handling this device?
Avoid damaging cables, disassembling units, or modifying them as it may cause electric shock or injury. Do not use in environments with flammable gases due to fire risk. Follow all warnings and cautions listed in the manual.
How should I mount the measuring unit?
Mount the unit on a plate with thickness between 7-11 mm (for DK812SF) or 9-11 mm (DK805SF). Use supplied tightening nuts, wave washers, and clamp spanners. Ensure parallelism within 0.02 mm/14 mm for accurate measurements.
What is the maximum response speed of this unit?
The maximum response speed varies by model: DK800SA can reach up to 80 m/min, while DK800SB reaches approximately 42 m/min. Ensure you use a counter or controller that supports these signal frequencies.
What is the resolution of this device?
The general-purpose models have resolutions of 0.1 μm and 0.5 μm, while high-resolution models offer up to 1 μm p-p accuracy. These values are based on standard specifications at room temperature.
How do I handle the cable for this unit?
Use dry air when connecting cables and avoid bending or pulling them forcefully. Ensure an inside bend radius of at least 50 mm to prevent breakage. Secure the cable in a suitable position to protect it from damage.
What are the environmental operating conditions for this unit?
The device operates within temperatures ranging from 0°C to 50°C and can be stored between –20°C to 60°C. It is rated IP64 or IP66 (depending on model) against dust and water ingress.
What should I do if the spindle speed is too fast?
If the spindle ejection speed causes errors, use a speed controller as shown in Fig. 1 to adjust the speed. This helps prevent damage to internal components like retainers within bearings.
How often should calibration be performed on this unit?
Calibration is recommended annually or more frequently if used in environments with organic solvents, ozone, or ultraviolet light that may degrade anti-dust bellows. Replace the bellows every six months to one year under such conditions.
What are the output signal characteristics of this unit?
The measuring unit outputs AB quadrature signals compliant with EIA-422 standards, along with reference point signals. The phase difference between A and B is proportional to travel distance, varying from 50 ns (for DK800SA) or 100 ns (DK800SB). Use a counter that can process these high-speed signals.
Related products from Magnescale
DT32P
User manual 12 pages
DT32P
User manual 12 pages
DT32N
User manual 12 pages
DT32N
User manual 12 pages
DG155BP
User manual 20 pages
DG205BP
User manual 20 pages
DL310B
User manual 20 pages
DL330B
User manual 20 pages
DK812SBVR
User manual 24 pages
DK812SBVR5
User manual 24 pages
DK830SLR
User manual 25 pages
DK830SLR
User manual 68 pages
DK830SR
User manual 25 pages
DK830SR
User manual 68 pages
DK830SR
User manual 68 pages
DK830SVR
User manual 25 pages
DK830SVR
User manual 68 pages
DK830SVR
User manual 68 pages
DK812SBFLR
User manual 26 pages
DK812SBFLR5
User manual 26 pages