Parkside PMSHM2 A3 (109 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I insert or change the batteries?
To insert or change the batteries, open the battery compartment cover and place two 1.5V AAA/LR03 batteries into the compartment, ensuring correct polarity as indicated by the symbols. Close the cover securely after installation.
What is the maximum depth for detecting wooden beams?
The detector can detect wooden beams up to a maximum depth of 19 mm, with a tolerance of ±3 mm. This depth is specific to the 'STUD' mode and may vary depending on the material and environment.
How do I switch the detector on and off?
To switch the detector on, press and hold the ON/OFF button until the display lights up. To turn it off, press and hold the same button again until the display turns off. The detector will automatically shut down after a period of inactivity.
What are the technical specifications of the detector?
The detector operates on 3V, powered by two 1.5V AAA/LR03 batteries. It can detect wooden beams up to 19 mm, metal objects up to 30 mm, voids up to 38 mm, and power lines up to 50 mm (with 230 V~50 Hz cables).
What should I do if the detector does not detect a known object?
If the detector fails to detect a known object, ensure the product is in the correct mode and that the object is within the specified detection range. Check the battery level and ensure the environment is suitable for detection. If the issue persists, refer to the troubleshooting section.
What safety precautions should I take when using the detector?
Before using the detector, ensure it is undamaged and not exposed to moisture. Always check for known metal beams, voids, or power lines before starting a measurement. Avoid using the detector in very damp conditions and disconnect AC power before any construction work to prevent electrical hazards.
How do I reset the detector?
To reset the detector, press and hold the RESET button until the display clears. This will return the device to its default settings and may help resolve any operational issues.
What are the different modes for detecting objects?
The detector has several modes for detecting objects: 'METAL' for metal objects, 'DEEP' for voids, 'STUD' for wooden beams, and 'AC' for power lines. Each mode is selected using the selection button and corresponds to specific detection ranges and depths.
What should I do if the batteries are weak?
Weak batteries can lead to inaccurate measurements. Replace the batteries immediately if the detector is not functioning properly or if measurements are inconsistent. Always use fresh, fully charged batteries for accurate results.
What are the safety instructions for handling batteries?
Keep batteries and rechargeable batteries out of reach of children. Do not dispose of batteries in fire, and never mix different types or brands. Avoid short-circuiting batteries and ensure they are stored in a cool, dry place away from moisture and heat.
Related products from Parkside
PDDM A1
User manual 274 pages
IAN270767
User manual 74 pages
IAN 290958
User manual 87 pages
PWM A1
User manual 97 pages
IAN 282405
User manual 100 pages
HG11898
User manual 108 pages
PNM 2 A1
User manual 651 pages
PLXM A1
User manual 143 pages
PEM A1
User manual 214 pages
PWM B2
User manual 246 pages
PLEM 50
User manual 455 pages