PRESIDIUM Gem Indicator (106 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I power up the Presidium Gem Indicator?
To power up the Presidium Gem Indicator, press and hold the [ON/OFF] button. The device will display 'SYS CHECK' as it warms up to the programmed temperature.
What are the battery requirements for the Presidium Gem Indicator?
The Presidium Gem Indicator uses 3x AAA batteries. Alkaline batteries are recommended for approximately 3 hours of continuous operation, while ordinary batteries provide a shorter lifespan. Always ensure the batteries are inserted with the correct polarity.
How do I clean the probe tip before testing?
Before testing, clean the probe tip using a piece of paper. Ensure the unit is switched off, then hold the probe pen at a right angle to the paper or stone rest and gently move it in a circular motion without retracting the tip.
What should I do if the 'SYS CHECK' fails?
If 'SYS CHECK' fails, an 'Error' message will appear. This may be due to improper tip connection, a new uncalibrated tip, or damaged internal connections. Remove and reinsert the tip, then recalibrate. If the error persists, contact Presidium.
How do I perform a test with the Presidium Gem Indicator?
To perform a test, press the probe tip against the gemstone for about 5 seconds. The tester will begin the test, and you will need to hold it in place until the testing bar on the screen is completed. You may also select the 'Color' option to narrow down the results.
What are the recommended operating conditions for the Presidium Gem Indicator?
The recommended testing temperature is between 23°C – 27°C or 73°F – 80°F. Allow the gemstone or jewelry to adjust to room temperature before testing. Operating outside these temperatures may affect the accuracy of the results.
How do I calibrate the Presidium Gem Indicator?
Calibration is required if testing is done outside the recommended operating conditions. Refer to Section 5 of the manual for the calibration procedure. Calibration ensures the accuracy and consistency of the testing results.
What does the battery life indicator show?
The battery life is indicated by an icon at the top right-hand corner of the display screen. Four bars indicate at least 75% battery life, while one bar indicates low battery (0–25%). The tester will shut down automatically after 10 minutes of inactivity.
How do I handle mounted gemstones during testing?
For mounted gemstones, hold the jewelry with one hand and the tester with the other. Ensure the probe tip is placed at a right angle to the gemstone's facet and press it against the stone. Avoid contact with any metal or jewelry setting parts to ensure accurate readings.
What should I do if the tester detects metal?
If the probe tip touches metal or conductive material, the screen will display 'Metal Detect' and an audible sound will be emitted (if sound is enabled). This indicates that the stone may be mounted in jewelry, and you should ensure it is securely set before proceeding with the test.
Related products from PRESIDIUM
PGI
User manual 106 pages
Diamond Mate
User manual 108 pages
Diamond Mate
User manual 108 pages
PDMT-C
User manual 108 pages
PDMT-A
User manual 108 pages
PDMT-A
User manual 108 pages
PDMT
User manual 108 pages
PDMT
User manual 108 pages
Diamond Mate A
User manual 108 pages
PRIM II
User manual 116 pages
Duo Tester
User manual 138 pages
Gem Computer Gauge PGCG
User manual 257 pages