Spectra LL100N (82 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I power the LL100N laser?
To power the LL100N, open the battery compartment using your fingers, a coin, or a screwdriver. Insert the batteries so that the negative poles face the larger battery spring. Push the compartment door until it clicks into place.
How do I set up the LL100N laser?
Place the laser horizontally or vertically on a stable platform, wall mount, or tripod at the desired height. The laser automatically detects whether it is in horizontal or vertical mode upon power-up. Note that it always operates in manual mode when in vertical position.
How do I turn the LL100N on and off?
Press the power button to turn the laser on. The laser starts in automatic self-leveling mode, with LEDs lighting up for 2 seconds. To turn it off, press the power button again.
How does the LL100N handle self-leveling?
The laser automatically levels when turned on. The leveling indicator lights up for 5 minutes, then starts blinking every 4 seconds to indicate it remains level. If the laser is out of its self-leveling range of ±8%, the beam and indicators flash simultaneously. Re-position the laser within the range and turn it on again.
How do I activate standby mode on the LL100N?
Press and hold the manual button on the remote control for 3 seconds to activate standby mode. The battery LED flashes every 4 seconds to indicate standby mode. To deactivate it, press and hold the manual button again for 3 seconds.
How do I use the manual mode on the LL100N?
In horizontal mode, press the manual button on the remote control to switch from automatic self-leveling to manual mode. The red LED flashes once per second. Use the up/down and left/right arrow buttons to slope the Y and X axes, respectively. Press the manual button again to return to automatic mode.
How do I use the Y-axis single slope mode?
Press the manual button twice on the remote control to activate the Y-axis single slope mode. The red and green LEDs flash once per second. In this mode, the Y-axis can be sloped using the up/down arrows, while the X-axis remains in automatic self-leveling mode. Press the manual button again to return to automatic mode.
How do I determine the height of instrument (HI) for the LL100N?
The height of instrument (HI) is the elevation of the laser beam. To determine it, add the grade rod reading to a benchmark or known elevation. Place the rod on a benchmark, adjust the receiver until it shows an on-grade reading, then add the rod reading to the benchmark to calculate the HI.
How do I check the calibration of the Y- and X-axes?
Set up the laser 30 meters from a wall and allow it to level. Adjust the receiver to get an on-grade reading for the +Y axis and mark the wall. Rotate the laser 180° and repeat for the -Y axis. Measure the difference between the marks. If they differ by more than 6 mm at 30 meters, the laser needs calibration.
What is the technical data of the LL100N laser?
The LL100N has a leveling accuracy of ±3 mm/30 m, operates in a 350-meter diameter area, uses a red diode laser (650 nm), and is Class 2 (<3mW). It has a self-leveling range of ±5°, a leveling time of about 30 seconds, and a battery life of 80 hours with alkaline batteries. It is IP54 rated for dust and water resistance, and operates between -5°C and 45°C.