THEIS VISION 2N ALIGN (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to set up the horizontal operation?
To set up the horizontal operation, align the tripod properly and secure the VISION with the tripod screw. The alignment accuracy affects the size of the inclination range. Press the On/Off button to power on the device. The level indicator will blink in the illuminated display. If the tripod head is tilted more than 5°, this will be indicated by a rapid blink of the laser beam and the alarm symbol. In this case, turn off the device and carefully realign the tripod. Once the leveling process is complete, the laser beam will start rotating.
How to operate in vertical mode?
To operate in vertical mode, position the laser so that the keyboard faces upward. Secure it with the 5/8" nut on the tripod if needed. Turn on the laser using the On/Off button. For alignment, press the arrow keys to adjust the laser beam. Holding the arrow key increases the movement speed. If the travel distance is exceeded, the display will show a changed bar arrangement, a rapidly blinking warning symbol, and a blinking laser beam. The end stops can be reset by pressing the arrow keys again.
How to adjust the rotation speed?
The rotation speed can be adjusted in 5 stages: 0, 200, 600, 800, and 1000 RPM. Pressing the rotation button three times stops the laser (speed 0). Further presses increase the rotation speed. While the laser is stationary, the laser point can be moved using the left/right rotation keys. Holding a key increases the movement speed of the laser point.
How to set the inclination in horizontal mode?
To set the inclination in horizontal mode, align the tripod head as horizontally as possible for more accurate targeting and to fully utilize the laser's ±15% inclination range in two axes. The AUTOSLOPE function monitors and automatically adjusts the inclination. First, align the laser precisely with the telescope or optical sight, then enter the inclination values as follows: First key press activates the inclination mode and displays stored values. Second key press makes the X-axis and first digit blink. Use the arrow keys to set the inclination value, changing the blinking digit as needed. Use left/right rotation keys to move to the next digit. Use the left key to change the sign. Pressing the arrow keys for a long time increases the value with acceleration.
How to set the inclination in vertical mode?
In vertical mode, inclination settings are only possible in the Y-axis. To set the inclination, align the laser vertically, power it on, and press the X/Y key. The procedure is similar to horizontal mode, but only the Y-axis inclination is adjustable. The laser will adjust its position based on the entered inclination values, and the inclination symbol will blink during the process.
How to set the inclination in manual mode?
To set inclination in manual mode, disable the device's automatic functions by pressing the On/Off button for about 5 seconds. First, align the laser precisely with the telescope or optical sight. Then, enter the inclination values for X and Y axes. Pressing the first key displays the inclination symbol and X-axis. Use the arrow keys to input the X-axis inclination. Pressing the second key shows the Y-axis and inclination symbol. For negative inclinations, the display shows a minus sign. Note that automatic leveling and AUTO-SLOPE monitoring are disabled in manual mode.
How to use the blind spot mode?
In blind spot mode, the laser beam can be adjusted to a specific size and position. This is only possible with a rotating laser beam. Pressing the button once activates the smallest blind spot setting. Further presses increase the blind spot range. Pressing the button four times exits the blind spot mode. The blind spot area is displayed as dark in the screen, while the laser beam remains visible in the bright area. Use the left/right rotation keys to rotate the blind spot area in the desired direction.
How to use the scan mode?
To enter scan mode, press the scan button. The smallest setting is 10°. Further presses allow you to set different laser line angles (10°, 20°, 40°, 60°, 80°), which are displayed on the screen. Use the left/right rotation keys to move the laser line accordingly. Holding a key increases the movement speed of the laser line. When exiting scan mode with the rotation button, the last position of the rotor head is saved. If scan mode is selected again later, the laser line will move to that position.
How to adjust the after-regulation range in leveling and inclination mode?
If the laser is frequently interrupted by wind, ground vibrations, or minor impacts, the Windy function allows you to reduce the sensitivity of the leveling and inclination sensors. Pressing the Windy button lowers the sensitivity of the instrument's leveling and inclination detection.
What is the TILT function and how does it work?
The TILT function ensures the device turns off and alerts you with a rapid blink of the laser beam and warning triangle if there are significant changes in the setup position (e.g., accidentally adjusting the tripod leg). After this, the device must be restarted to resume operation.