Wohler FA 430 (155 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to turn the device on and off?
To turn the device on, briefly press the power button. To turn it off, hold the power button for a few seconds. The device will automatically shut down after a period of inactivity.
How to select the measurement channel?
Use the setup mode to select the desired measurement channel. This allows you to choose between different measurement parameters such as airflow, temperature, humidity, or CO2 levels.
How to measure airflow with a flow hood?
Place the flow hood over the air outlet, ensuring a secure fit. The device will automatically detect the airflow and display the volume flow rate. Make sure the hood is properly sealed to avoid measurement errors.
How to measure airflow without a flow hood?
Position the device directly in the airflow path. Ensure the sensor is fully exposed to the air stream. The device will calculate the volume flow rate based on the detected airspeed and cross-sectional area.
How to measure relative humidity?
Switch to the humidity measurement mode using the setup menu. The device will display the relative humidity level in percentage. Ensure the environment is stable to avoid fluctuations in the reading.
How to measure CO2 levels?
Use the CO2 measurement mode available on the Wöhler FA 430 model. The device will display the CO2 concentration in parts per million (ppm). Ensure the sensor is clean and free from obstructions for accurate readings.
How to stop and print the data?
Press and hold the HOLD/MIN/MAX button to stop the measurement and start the print process. The device will output the data onto the thermal printer. Ensure the printer is properly connected and has sufficient paper.
How to display the minimum and maximum values?
Hold the HOLD/MIN/MAX button to view the minimum and maximum values recorded during the measurement. This feature helps in analyzing the range of airflow or other parameters over time.
How to set the unit of measurement?
Access the setup menu and select the desired unit of measurement, such as meters per second (m/s) for airflow or degrees Celsius (°C) for temperature. This setting ensures the displayed values are in the preferred format.
How to replace the batteries?
Open the battery compartment on the back of the device. Remove the old batteries and insert new AAA batteries, ensuring the correct polarity. Close the compartment securely and test the device to confirm it is functioning properly.