Xetron DMG-10X (95 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do you turn on the DMG-10X digital manifold gauge?
To turn on the device, long press the power button. This will activate the main interface for operation.
How do you switch refrigerant types?
To switch refrigerant types, first unlock the refrigerant settings by long pressing the button. Then, short press the button to select the desired refrigerant type.
What is the pressure range of the DMG-10X?
The DMG-10X digital manifold gauge has a pressure range of -14~800psi, making it suitable for a wide variety of refrigeration and heating systems.
How do you zero calibrate the pressure sensor?
To zero calibrate the pressure sensor, long press the button until the device enters the calibration mode. Ensure the system is disconnected from any pressure source before calibration.
What refrigerant types are supported by the DMG-10X?
The DMG-10X supports a wide range of refrigerants, including R11, R12, R22, R410A, R407C, R404A, and many others. The full list can be updated via the accompanying app.
How do you enter the pressure holding mode?
To enter the pressure holding mode, press and hold the two buttons simultaneously for 3 seconds. The display will show 'HOLD', indicating the mode is active.
What is the battery type and life of the DMG-10X?
The DMG-10X uses 2 x 1.5V AAA batteries. With the screen backlight off, the battery life is approximately 200 hours.
How do you perform a leak test using the DMG-10X?
To perform a leak test, connect the device to the system, reach the pressure warning value, and press the button to start the test. The device will monitor the pressure and display the result after the test completes.
What is the working temperature range of the DMG-10X?
The DMG-10X operates within a temperature range of 14~122℉ (-10~50℃). It can be stored between -4~140℉ (-20~60℃) for safe storage.
How do you exit the test result interface?
To exit the test result interface, long press the button. This will return the device to the main interface for further operations.