Resol PSW Basic (52 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the PSW Basic used for?
The PSW Basic signal converter allows connecting variable-speed high-efficiency pumps with PWM or 0-10-V control inputs to controllers without corresponding outputs. It converts a standard pump's 230 V signal into one that can drive an HE-pump.
What types of signals does the PSW Basic support?
The device supports both PWM and 0-10-V output signals, with options for inverting these outputs. It is compatible with pumps using either type of control signal.
How do I invert the output signal on the PSW Basic?
Use the jumper located above the output terminals to set whether the output signal should be inverted or not. Positioning the jumper on the left side disables inversion, while placing it on the right enables inversion.
What are the technical specifications of the PSW Basic?
The device operates with a 230 V~ (50 Hz) power supply and has an input range for PWM signals at 11 volts. It supports both PWM and 0-10-V outputs, consumes up to 1.5 VA, and is rated IP65 for protection against dust and water.
What safety precautions should I take when installing the PSW Basic?
Always disconnect the device from power before opening its housing or performing any maintenance. Ensure that it is installed in a dry indoor location, away from strong electromagnetic fields to prevent interference with operation.
How do I connect the signal cable for the pump?
Connect the blue wire of the pump's signal cable to GND and attach the brown wire depending on the type of control signal. For 0-10 V, use the '0-10V Out' terminal; for PWM, use the 'PWM Out' terminal.
What is the maximum height at which the PSW Basic can be installed?
The device should not be mounted higher than 2000 meters above sea level to ensure proper operation under atmospheric conditions and electrical performance standards.
How do I mount the PSW Basic on a wall?
Select an installation position, mark drill holes through the mounting slots, bore both holes, secure the housing with screws through the slots, then remove the top cover to make electrical connections before reattaching it.
What is the purpose of the HE-Check accessory?
The HE-Check test device allows for quick and easy verification of pump functionality and controller signals. It helps ensure that both components are operating correctly without requiring complex diagnostic tools.
Can I use this device with heat pumps or fresh water regulators?
No, the PSW Basic is not suitable for use with heat pumps or fresh water controllers due to its design and intended application in thermal heating and solar systems. It should only be used as specified.