Leica DMI3000B (232 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the key safety precautions for operating the Leica DMI series microscopes?
The Leica DMI series microscopes are classified as safety class 1 devices and must be used in accordance with EN 61010-2-101:2002, EN 61010-1:2001, and IEC 1010-1:2001. Always follow the instructions in the manual to ensure safe operation. Unauthorized modifications or non-compliant use may void warranty claims.
What is the power supply requirement for the Leica CTR4000, CTR6000, and CTR6500 electronics boxes?
The Leica CTR4000, CTR6000, and CTR6500 electronics boxes require a power supply of 90–250 V~ at 50–60 Hz. The maximum power input is 290 VA, and the fuses are T6.3 A (IEC 60127-2/3). The ambient temperature should be between 15–35°C, and the relative humidity should not exceed 80% at temperatures above 30°C.
How should the microscope be grounded to ensure safety?
The microscope must be connected to a grounded outlet. Never use an extension cord without a ground wire, as this can create a hazardous situation. The grounding connection must remain intact to prevent electrical hazards.
What are the environmental conditions for operating the Leica DMI series microscopes?
The Leica DMI series microscopes are designed for indoor use only. The ambient temperature should be between 15–35°C, and the relative humidity should not exceed 80% at temperatures above 30°C. The overvoltage category is II, and the pollution degree is 2.
What is the power requirement for the ebq 100 supply unit?
The ebq 100 supply unit requires a power supply of 90–250 V~ at 50–60 Hz. The maximum power input is 155 VA, and the fuses are 2xT2A (IEC 127). The ambient temperature should be between 10–36°C, and the relative humidity should not exceed 80% at temperatures above 30°C.
What are the recommended practices for connecting peripheral devices to the microscope?
Peripheral devices with their own or separate power supplies should be connected to the ground screw on the back of the Leica CTRxxxx electronics boxes to ensure the same protective conductor potential. For connections without a ground connector, consult Leica Service.
What are the key features of the Leica DMI series microscopes?
The Leica DMI series microscopes are designed for biological research and routine applications. They support various contrast methods such as bright field, phase contrast, dark field, polarization, and differential interference contrast. They also support fluorescence and modulation contrast, and are suitable for micromanipulation, microinjection, and confocal microscopy.
What are the safety implications of using the microscope for purposes other than its intended use?
The manufacturer assumes no liability for damage caused by using the microscopes for purposes other than those for which they are intended. Using the microscope outside of its specified parameters may invalidate the declaration of conformity and void warranty claims.
What are the electrical safety requirements for the microscope and its accessories?
The microscope and its accessories must comply with safety regulations for electrical measuring, control, and laboratory devices. Always ensure that the grounding function is intact and that the device is used only with the specified power supply and environmental conditions.
What should be done if the microscope is connected to a medical instrument?
If the microscope is electrically connected to a medical instrument according to EN 60601-1, the requirements defined in EN 60601-1-1 must be followed. The microscope is not intended for use in the patient environment defined by DIN VDE 0100-710 or for combining with medical instruments according to EN 60601-1.
Related products from Leica
ATC 2000
User manual 8 pages
ZOOM 2000
User manual 12 pages
BM E
User manual 20 pages
BM E
User manual 24 pages
CM E
User manual 24 pages
DM EP
User manual 24 pages
DM LSP
User manual 46 pages
FS M
User manual 82 pages
LMD6500
User manual 92 pages
LMD7000
User manual 92 pages
WILD M690
User manual 109 pages
DMi1
User manual 132 pages
DM3 XL
User manual 136 pages
DM2700 M
User manual 156 pages
DMLS
User manual 160 pages
DM4000 B
User manual 164 pages
DM5000 B
User manual 164 pages
DM4000 M
User manual 164 pages
DM4500 P
User manual 164 pages
DM1000
User manual 178 pages