Optika IM-2ERGO (110 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the optical head?
To install the optical head, remove the dust cap and secure it using screw ①. Then insert the trinocular tube into the exit above the head and fix it with screw ②.
How do I install the objectives?
Turn the coarse focusing knob until the nosepiece reaches its lowest position. Screw the lowest magnification objective onto the turret from the right side, then turn the turret clockwise. Mount the other objectives in the same way, following the sequence from low to high.
How do I install the stage extension and mechanical stage?
Install the stage extension by screwing the bolts onto it and mounting it from below the stage. The mechanical stage must be installed on the opposite side of the extension. For right-handed users, it is typically placed on the right side.
How do I install the condenser and LED housing?
Insert the condenser illumination unit into the bracket. Turn it clockwise about 90° with the 'AS' mark facing forward. Secure it with the provided allen wrench. Then gently push the LED housing into the holes of the illumination unit.
How do I install the color filters?
Remove the filter holder and install the color filters you need. Mount them flat to ensure they are not tilted. The filters can be stacked in the holder, as long as the total thickness is less than 11 mm.
How do I connect the power cord?
Turn the main switch to 'O' (off) before connecting the power cord. Insert the cable into the microscope's power socket and plug the power cord into the mains socket. Ensure the connection is safe and use the supplied power cord.
How do I replace the fuse?
Before replacing the fuse, turn the main switch to 'O' (off) and unplug the power cord. Rotate the fuse support out of the holder using a straight screwdriver. Insert a new fuse into the support and rotate it back into the holder.
What is the recommended operating voltage?
Before plugging in the power supply, ensure that the supplying voltage of your region matches the operation voltage of the equipment. The equipment is CE certified, but users must follow safety regulations and ensure correct voltage compatibility.
What are the available objectives?
The microscope includes objectives such as 4x/0.10, 10x/0.25, 20x/0.40, and 40x/0.60. Some objectives are specifically designed for phase contrast applications, and others are compatible with additional accessories like the phase ring.
What accessories are included with the microscope?
The microscope comes with an ergonomic binocular head, trinocular attachment, eyepieces, a micrometric slide, various objectives, a phase contrast slide, a condenser, LED illuminator, and multiple holders for slides, Petri dishes, and other samples.
Related products from Optika
SFX-51
User manual 110 pages
B-190
User manual 44 pages
B-290
User manual 43 pages
B-290
User manual 144 pages
SZM-LED2
User manual 43 pages
SZM-LED1
User manual 43 pages
DM-5
User manual 48 pages
LAB
User manual 48 pages
SZM-4
User manual 48 pages
SZM-1
User manual 48 pages
B-150ALC
User manual 52 pages
B-150
User manual 52 pages
B-380 Series
User manual 64 pages
B-380 Series
User manual 80 pages
B-380 Series
User manual 222 pages
B-1000
User manual 62 pages
B-1000
User manual 80 pages
B-1000
User manual 100 pages
B-383LD2
User manual 64 pages
B-383LD2
User manual 222 pages