kibri 39704 (5 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What locomotive lengths fit on the 200 mm turntable?
The 200 mm diameter turntable suits most small to medium H0 locomotives and shorter steam or diesel units. Very long modern locomotives or multi-section units may overhang, so check individual loco chassis length before planning installation and consider modifying track placement for clearance.
Is the Kibri 39704 turntable compatible with standard H0 track?
Yes, the Kibri 39704 is designed to integrate with standard H0 track geometry. Track alignment at the turntable entry points is important for reliable operation; use measured alignment, consistent track height, and fine-adjustment rail joiners for smooth transitions between the table and layout track.
Does the kit include a motorized drive for automatic rotation?
The kit is supplied as a precision-molded assembly intended for manual or mechanical rotation depending on build choices. It does not include an electric motor by default, but the design allows retrofitting a compact motor and reduction gearing if you want powered, controlled rotation.
What adhesive and paints are best for the precision-molded plastic?
Use polystyrene cement or medium-viscosity cyanoacrylate adhesives for durable bonds on the kit's styrene parts. Prime with a compatible plastic primer and paint using acrylic or enamel model paints in thin layers, allowing full cure between coats for crisp detail and long-lasting finish.
How do I assemble the bridge and support structures for smooth rotation?
Dry-fit all bridge and support parts first, remove flash, and lightly sand mating surfaces. Ensure the central pivot is square and free of excess glue. Test rotation during assembly and add small shims for level alignment so the bridge rotates without binding under load.
Can the turntable be integrated electrically for powered operation?
Yes, it can be adapted for electrical operation by adding a pickup system and a compact drive motor with gears. Plan for insulated rail sections and reliable electrical contacts at the pivot; keep wiring tidy and accessible for maintenance and to avoid interference with rotation.
How should I maintain and lubricate the turntable for long life?
Keep the turntable free of dust and ballast debris, and periodically inspect the pivot and bearings. Use a very light synthetic oil or PTFE lubricant sparingly on moving points, avoiding excess that attracts dirt. Tighten loose fasteners and realign rails as needed for reliable performance.
Are there common modifications to improve realism or function?
Modelers often add subtle weathering, scenic details around the pit, aftermarket motors for powered rotation, and electrical pick-ups for powered servicing. Small detail parts and handrails can enhance realism, while surtaping the underside improves durability and hides wiring for cleaner integration.
What tools are recommended to achieve precise assembly and fit?
Essential tools include a sharp hobby knife, fine files, small needle-nose pliers, precision tweezers, sanding sticks, and a small square for alignment. A magnifier and a fine-tip applicator for glue will improve accuracy when fitting tiny parts, and a low-torque drill helps for motor retrofit work.
Is the assembled turntable durable enough for frequent layout operation?
When assembled carefully with proper adhesives and alignment, the turntable is robust for regular model railroad use. Durability depends on build quality and maintenance; avoid excessive loads, keep moving parts clean, and perform periodic checks to ensure continued smooth operation and long service life.