Bosch DVA-08K (388 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely install the RAID subsystem?
The RAID subsystem is heavy even without installed disks. It must be installed by at least two people. The enclosure must provide overcurrent protection and not be overloaded with installed modules. Ensure proper ventilation, structural stability, electrical grounding, and power distribution as per the product documentation.
How to secure the RAID subsystem?
All subsystems must be secured using the provided mounting brackets and fastened with four screws on the front panel. Never secure the subsystems only with front panel screws, as this may cause frame deformation and apply unacceptable pressure and torque on internal components, leading to various malfunctions.
What are the safety precautions for handling the RAID subsystem?
Ensure you have a soft, clean surface for placing the subsystem. Avoid placing the system on rough surfaces during repairs or maintenance to prevent damage to the bottom coating. Do not remove any modules or components from the antistatic packaging until ready for installation. Handle modules by the edges or metal casing, and avoid touching PCBs and connector pins.
How to handle static electricity when working with the RAID subsystem?
Follow all standard precautions against static discharge, such as wearing an antistatic wristband to prevent damage to electrical components from static electricity. Always handle hard drives by the drive cage surfaces, not the unit surfaces, to avoid damage to PCBs and connectors.
What is the default RAID configuration for the DVA-08E, DVA-08K, and DVA-16K?
The subsystems are delivered with hard drives pre-configured for standard RAID 5. This configuration is suitable for most system setups. The default settings include RAID 5 with no spare disks, 16 KB stripe size, and specific partition sizes depending on the model.
What are the default settings for the DiBos and Divar recorders?
The default settings for DiBos and Divar recorders include RAID 5 configuration with specific partition sizes, SCSI IDs, and LUN IDs. These settings vary depending on the model (500 GB or 1 TB) and are outlined in the provided tables.
What are the default system settings for the RAID subsystem?
The default system settings include static IP address configuration, write-back cache enabled, sequential I/O optimization, and periodic cache flush times. These settings are tailored for optimal performance and are listed in the configuration parameters section.
How to configure the host-side settings for the RAID subsystem?
Host-side settings include maximum queued I/O count, LUNs per host ID, and concurrent host-LUN limits. These settings ensure efficient data transfer and are configured to support multiple devices and connections.
What are the drive-side configuration parameters?
Drive-side parameters include disk access delay time, drive I/O timeout, maximum tag count, and periodic drive check times. These settings are crucial for maintaining drive performance and reliability during operation.
How to configure the disk array settings for the RAID subsystem?
Disk array settings include rebuild priority, verification on initialization and rebuild writes, and AV optimization mode. These settings ensure data integrity and efficient disk management during operation.
Related products from Bosch
0 684 200 702
User manual 4 pages
CPH 0006 A
User manual 44 pages
EPH 0012 A
User manual 44 pages
MPH 0010 A
User manual 44 pages
FPA-5000 OPC
User manual 268 pages
Connect-Key K 40 RF
User manual 124 pages
Rexroth CKK
User manual 14 pages
Rexroth CKR
User manual 14 pages
PMF 0004 A
User manual 24 pages
3 842 406 960
User manual 22 pages
3 842 406 960
User manual 44 pages
FLM-420-RLV1-E
User manual 24 pages
FLM-420-I2-E
User manual 24 pages
FLM-420-I2-E
User manual 32 pages
FLM-420-RLV1-D
User manual 24 pages
FLM-320-EOL4W-S
User manual 24 pages
PSF 0002 A
User manual 24 pages
USF 0000 A
User manual 24 pages
BEA 030
User manual 28 pages
BEA 030
User manual 44 pages