Bosch DVA-16K (388 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely install the RAID subsystem?
The RAID subsystem is heavy even without installed disks. It must be installed by at least two people. The enclosure must provide overcurrent protection and not be overloaded with installed modules. Additional requirements such as airflow, frame stabilization, electrical grounding, and power distribution must meet the technical specifications provided in the documentation.
How to secure the RAID subsystem?
All subsystems must be secured using the provided mounting brackets and fastened with four screws in the front panel. They must not be secured only by the front panel screws, as this could cause deformation of the frame and apply unacceptable pressure and torsion forces on internal components, leading to various malfunctions.
What are the safety precautions when handling the RAID subsystem?
Ensure you have a soft, clean surface for placing the subsystem. Avoid placing the system on rough surfaces during repairs or maintenance to prevent damage to the bottom surface finish. Do not remove any modules or components from the antistatic packaging until you are ready to install them. Handle modules by the edges or metal casing and avoid touching PCB boards and connector pins.
How to handle static electricity during installation?
Follow all standard preventive measures against static discharge, such as wearing an antistatic wristband to prevent damage to electrical components caused by static electricity. Always handle hard drives by the drive cage surfaces, not the drive units, and avoid touching PCB boards and connector pins to prevent damage from static discharge.
What is the default RAID configuration for the DVA-08E/08K/16K subsystems?
The subsystems are delivered with hard drives pre-configured for standard RAID 5. This configuration is suitable for most system setups. The default settings include RAID 5 with 4, 8, or 16 hard drives, depending on the model, and no spare disks.
How to configure the RAID subsystem for optimal performance?
The subsystems are pre-configured with RAID 5, stripe size of 16 KB, and specific partition sizes. For example, the DVA-08E has 4 hard drives with a 1.5 TB partition, while the DVA-16K has 16 hard drives with a 1.875 TB partition. These settings can be adjusted via the RAIDWatch application.
What are the system settings for the RAID subsystem?
The system settings include parameters such as static IP address (10.11.12.13), subnet mask (255.0.0.0), write-back cache enabled, sequential I/O optimization, and periodic cache flush time of 30 seconds. These settings can be modified through the RAIDWatch application.
How to connect the subsystem to the host computer?
The subsystem can be connected to the host computer via a network. Use the RAIDWatch application to change the IP address and configure the RAID disk array. Ensure that all hard drives are installed before powering on the subsystem or digital video recorders to prevent damage.
What are the requirements for connecting digital video recorders?
Digital video recorders such as DiBos 8, Divar, and VIDOS NVR can be connected to the RAID subsystem. Ensure that all components are properly installed and secured before connecting them. Follow the installation guide for detailed connection instructions.
How to handle hard drives during installation?
Hard drives are sensitive to shocks and vibrations. Always install all devices into the enclosure before powering on any subsystems or digital video recorders. Avoid moving or rearranging devices while the system is powered on. Ensure that all cables are properly organized to prevent interference between power and data cables.
Related products from Bosch
CPH 0006 A
User manual 44 pages
EPH 0012 A
User manual 44 pages
MPH 0010 A
User manual 44 pages
FPA-5000 OPC
User manual 268 pages
Connect-Key K 40 RF
User manual 124 pages
Rexroth CKK
User manual 14 pages
Rexroth CKR
User manual 14 pages
PMF 0004 A
User manual 24 pages
3 842 406 960
User manual 22 pages
3 842 406 960
User manual 44 pages
FLM-420-RLV1-E
User manual 24 pages
FLM-420-I2-E
User manual 24 pages
FLM-420-I2-E
User manual 32 pages
FLM-420-RLV1-D
User manual 24 pages
FLM-320-EOL4W-S
User manual 24 pages
PSF 0002 A
User manual 24 pages
USF 0000 A
User manual 24 pages
BEA 030
User manual 28 pages
BEA 030
User manual 44 pages
BEA 030
User manual 204 pages