Busch-Jaeger 6180/12 (96 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the Akku-Modul 6180/12?
The Akku-Modul 6180/12 is a lead-acid accumulator designed to buffer the KNX system voltage in a Busch-Installationsbus KNX setup. It provides power during network outages and ensures uninterrupted operation of the KNX line for at least 10 minutes when used with the 6180/11 unit.
What are the technical specifications of the Akku-Modul 6180/12?
The Akku-Modul 6180/12 has a nominal charging voltage of 12 V DC, a nominal charging current of 150 mA, and a maximum discharge current of 5 A. It has a capacity of 1 Ah and can buffer power for at least 10 minutes when connected to the 6180/11 unit. The operating temperature range is between +5°C and +45°C.
How should the Akku-Modul 6180/12 be stored?
The Akku-Modul 6180/12 should not be stored in a discharged state. If it is to be stored for an extended period without connection to the 6180/11 unit, it must be fully charged every six months. It can be stored for a maximum of two years at 20°C.
What safety precautions should be taken when handling the Akku-Modul 6180/12?
The device must be protected from moisture, dirt, and damage during transport, storage, and operation. It should only be operated within the specified technical parameters and in a closed housing (distribution box). It must be connected to the designated terminal blocks and not be obstructed from cooling.
Can the Akku-Modul 6180/12 be used with other devices?
The Akku-Modul 6180/12 must not be connected in series or parallel with other Akku-Moduls or lead-acid accumulators. It is specifically designed to be used in conjunction with the 6180/11 unit for uninterrupted power supply in a KNX system.
What is the role of the PTC sensor in the Akku-Modul 6180/12?
The Akku-Modul 6180/12 includes an integrated PTC sensor that provides temperature-regulated voltage feedback during charging. This ensures safe and efficient charging while protecting the device from overheating.
What is the IP rating of the Akku-Modul 6180/12?
The Akku-Modul 6180/12 has an IP 20 rating according to EN 60 529, which means it is protected against solid objects larger than 12.5 mm and against vertical water jets. It is not suitable for outdoor or wet environments.
What are the connection requirements for the Akku-Modul 6180/12?
The Akku-Modul 6180/12 has specific terminal connections for the positive and negative battery terminals, the PTC sensor, and the code connection. The maximum cable length is 10 meters, and the conductor cross-section should be between 0.75 and 1.5 mm² for both single and multi-core cables.
How often should the Akku-Modul 6180/12 be replaced?
Due to the limited lifespan of the lead-acid accumulator, it is recommended to replace the Akku-Modul 6180/12 every five years. Old units can be returned to Busch-Jaeger for environmentally responsible disposal.
What should be done after discharging the Akku-Modul 6180/12?
After discharging the Akku-Modul 6180/12 during normal operation, it should be recharged as soon as possible to maintain its performance and longevity. Delaying recharging may reduce the battery's capacity and lifespan.