HBM TEDS (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I connect a 1-Wire® TEDS module?
To connect a 1-Wire® TEDS module, ensure your measuring amplifier has a dedicated input for the TEDS. The second connection is typically signal ground or earth. Connect the TEDS (+) pin to the amplifier's designated input, and refer to your amplifier's manual for specific connector details.
What are the wiring colors for a Zero-Wire TEDS module?
The cable wire colors for a Zero-Wire TEDS module are as follows: blue (bl), green (gn), gray (gy), red (rd), black (bk), and white (wh). These colors correspond to specific signal and power connections, which should be matched to the transducer's wiring diagram.
How do I mount a TEDS module in a D-sub-HD15 plug?
Mount the TEDS module between the first and second rows of the D-sub-HD15 plug, connecting it to pins 1 to 5. Then, turn the plug around and solder connections 6 to 10 on the opposite side. Ensure the soldering is done carefully to avoid damaging the module or the plug.
What is the purpose of a TEDS module?
A TEDS module contains an electronic data sheet with all key transducer characteristics and a unique identification number. It allows a measuring amplifier to automatically set up and calibrate the transducer, ensuring accurate measurement of physical quantities.
Can I use existing wires for TEDS data transmission?
Yes, with a Zero-Wire TEDS module, you can use existing wires to transfer TEDS data, provided the amplifier supports this TEDS variant. This allows switching between DAQ mode (analog signal) and data mode (digital TEDS data) using the same cables as for transducers without TEDS.
What are the different TEDS module variants available?
TEDS modules are available for D-sub-HD15 plugs with two or three rows of connectors. Variants include modules with and without plugs, as well as adapter cables for connecting TEDS modules to D-sub-HD15 plugs. Zero-Wire and 1-Wire® TEDS modules are also available.
What is the difference between Zero-Wire and 1-Wire® TEDS?
Zero-Wire TEDS uses existing wires to transmit TEDS data, while 1-Wire® TEDS requires a separate input on the amplifier. Zero-Wire TEDS is suitable for 6-wire or 4-wire configurations, whereas 1-Wire® TEDS is typically used for simpler setups with fewer connections.
How do I ensure proper installation of the TEDS module?
Ensure the TEDS module is soldered correctly between the first and second rows of the plug, connecting pins 1 to 5. Then, solder connections 6 to 10 on the opposite side. Always use appropriate lead-free solder and an ESD wrist strap to protect the module from static discharge.
What should I do if the transducer does not have a built-in TEDS module?
If the transducer does not have a built-in TEDS module, you can integrate a TEDS module into the transducer plug later. This allows the measuring amplifier to automatically read and use the transducer's data for accurate measurement and calibration.
What are the key features of a TEDS module?
A TEDS module contains an electronic data sheet with all essential transducer characteristics, including unique identification numbers. It enables automatic setup and calibration of the measuring amplifier, ensuring accurate and reliable measurement of physical quantities.