Marmitek AWM2 (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum number of addresses for the Marmitek X-10 system?
The Marmitek X-10 system can preset up to 256 different addresses. These are divided into a HouseCode (A to P) and a UnitCode (1 to 16).
How does the Marmitek X-10 system communicate?
The Marmitek X-10 system uses the existing mains wiring to communicate through Marmitek X-10 signals. This allows for the control of lamps and appliances across the home.
What are the components of the Marmitek X-10 system?
The Marmitek X-10 system includes modules that receive signals and control devices, controllers that transmit signals, and transmitters like remotes that send signals through the power line.
How can I increase the range of Marmitek X-10 signals?
To increase the range, you can use a CAT 3000 active 3-phase coupler/repeater or install FD10 Phase Coupler/Filter on each phase entering the house. These help reduce interference and improve signal transmission.
What can cause interference with Marmitek X-10 signals?
Interference can be caused by devices like PC monitors, fluorescent lights, and baby phones in TALK mode. These can attenuate signals, reducing the effective range of the system.
How do I connect the AWM2 module to the power line?
Connect the blue wire to the neutral clamp, the brown wire to the first input, and the red wire to the second input. Ensure the main switch is turned off before installation.
Can the AWM2 module respond to group commands?
Yes, the AWM2 module can respond to group commands such as 'ALL LIGHTS ON' or 'ALL UNITS OFF'. These functions are disabled by default and can be enabled through programming.
How do I program the AWM2 module?
To program the AWM2 module, press the setup (prog.) button for at least 3 seconds. The LED should stay on after releasing the button. You can exit setup mode by pressing the button again or waiting 60 seconds.
What is the purpose of the built-in appliance module?
The built-in appliance module remembers its status after a main voltage cut-off and can be controlled through the power line. It can also transmit its status to other modules or a computer interface.
What safety precautions should I take when installing the AWM2 module?
Always turn off the main switch before installing the module. The wires carry live 230V voltage, and the device may contain live parts. Only qualified personnel should handle repairs or servicing.