National Instruments SCXI (98 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install an SCXI module in a new chassis?
To install an SCXI module in a new chassis, first touch any metal part of the chassis to discharge static electricity. Insert the module into the SCXI slot and secure it to the chassis front panel mounting rail using the two thumbscrews. Ensure the chassis is powered off before installation to avoid damage.
What are the steps to set up an SCXI chassis?
To set up an SCXI chassis, power off and unplug the chassis. Set the chassis address if it is addressable. Confirm the correct power settings (100, 120, 220, or 240 VAC), and connect the power cord. Follow ESD precautions to ensure you are grounded before installing the hardware.
How do I connect the SCXI chassis to a DAQ device?
For a single-chassis system, connect one end of the 68-pin shielded cable to the SCXI-1349 cable adapter and the other end to the DAQ device. For M Series devices, connect the cable to connector 0. For multichassis systems, use the SCXI-1346 adapter between chassis and connect the cables accordingly.
What is the process for attaching sensors and signal lines?
Attach sensors and signal lines to the terminal block, accessory, or module terminals for each installed device. Use the DAQ Assistant to view and print a connection diagram for NI-DAQmx tasks and virtual channels. Refer to the device documents for pin assignments and terminal block information.
How do I install a SCXI USB module?
SCXI USB modules are plug-and-play and communicate between an SCXI system and a USB-compatible computer. Connect the USB cable from the computer port or USB hub to the SCXI USB module. Attach the cable to the strain relief using a cable tie. Ensure no intermediate DAQ device is needed.
What should I do if I need to add a module to an existing SCXI system?
To add a module to an existing SCXI system in multiplexed mode, install additional SCXI modules in any available chassis slots. Use the Cable Adapter to determine which module to connect to the cable adapter. Ensure the system controller is already established before adding new modules.
How do I attach terminal blocks to the SCXI module?
Attach the terminal blocks to the front of the modules. Refer to ni.com/products to determine valid terminal block and module combinations. If using a TBX terminal block, refer to the TBX installation guide for detailed instructions.
What is the procedure for installing a cable adapter in a single-chassis system?
To install a cable adapter in a single-chassis system, identify the appropriate SCXI module to connect to the cable adapter. Insert the 50-pin female connection on the rear of the cable adapter into the 50-pin male connector on the SCXI module. Fasten the adapter to the rear of the chassis using the provided screws.
How do I set up a multichassis system with SCXI modules?
For a multichassis system, use one SCXI-1346 multichassis adapter for every chassis in the chain except the last one. Connect the SCXI-1346 adapter between chassis, and use the SCXI-1349 cable adapter for the last chassis. Ensure the correct modules are connected to the adapters based on their addressing and configuration.
What are the safety precautions when working with SCXI systems?
Follow proper ESD precautions to ensure you are grounded before installing hardware. Refer to the Read Me First: Safety and Radio-Frequency Interference document for precautions. Avoid forcing adapters to prevent bending pins. Do not install a damaged device and notify NI if any damage is observed.
Related products from National Instruments
NI cDAQ-9174
User manual 5 pages
NI cDAQ-9178
User manual 5 pages
SCXI-1581
User manual 98 pages
SCXI-1104
User manual 98 pages
SCXI-1104C
User manual 98 pages
SCXI-1104D
User manual 98 pages
SCXI-1100
User manual 98 pages
SCXI-1112
User manual 98 pages
SCXI-1125
User manual 98 pages
SCXI-1125
User manual 98 pages
SCXI-1300
User manual 98 pages
SCXI-1303
User manual 98 pages
SCXI-1328
User manual 98 pages
SCXI-1102B
User manual 98 pages
SCXI-1102C
User manual 98 pages
SCXI-1140
User manual 98 pages
NI SCXI-1304
User manual 98 pages