OTC 4291 (44 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I register the warranty for this product?
To ensure exceptional customer service, you must register your warranty online at www.otctools.com or call 1-800-533-6127 and follow the prompts for OTC technical assistance.
What is the purpose of the loading valve?
The loading valve controls flow by moving a poppet in and out of a port via a threaded shaft. It ensures low handle effort across pressure ranges and includes burst discs to bypass oil safely during overpressure events.
How does the temperature display work on this unit?
Temperature is displayed on the left side of the digital screen when using an internal flow meter, while remote meters plugged into INT or EXT sockets show readings in those positions. Pressing °C/°F toggles between Celsius and Fahrenheit.
What are the dimensions of the 4291 model?
The unit has a height of approximately 8-3/4" (222 mm), with specific measurements for each dimension. Add 3/4" (20 mm) to G for full height including feet.
What is the flow range of this device?
The unit measures a wide range from 2.5 - 100 US gpm or 10 - 400 lpm, suitable for various hydraulic applications and compatible with different fluid types including oils and water emulsions.
How do I connect the flow meter to the system?
Connect flexible hoses of appropriate length (3-6 ft) between the unit and the hydraulic circuit. Ensure all connections are secure, avoid sharp bends, and use quick-disconnect couplings for efficiency.
What safety precautions should be taken when using this device?
Always wear ANSI Z87.1-compliant eye protection. Inspect equipment before each use to ensure it is undamaged. Ensure the load valve is fully open prior to testing and avoid overpressure conditions by following proper procedures.
What are the calibration specifications for this unit?
The flow meter is calibrated at 21 cSt as standard, but special calibrations can be provided for custom ranges or different viscosities. Contact OTC Technical Services to discuss your specific application requirements.
How do I interpret the display when measuring flow rate?
Flow rates are displayed on the right side of the digital screen in US gpm, lpm, or IMP gpm depending on unit selection. The display shows 'L' if below minimum and 'H' if exceeding maximum allowable limits.
What is the purpose of the burst discs within the loading valve?
Burst discs are designed to rupture during overpressure events, allowing oil to bypass internally at low pressure and protecting both the unit and hydraulic system from damage due to excessive force or flow.