SICK MAS (128 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to identify the active area of the sensor?
The active area of the sensor is defined by the rounded lip on the sensor's surface. The magnet must be positioned at the center of the sensor to ensure accurate operation.
What is the maximum allowable distance between the magnet and the sensor?
The working distance between the magnet and the sensor is defined by the qualified magnets listed in the manual. Exceeding this distance may lead to increased linearity error, while falling below the minimum distance can affect the sensor's electromagnetic compatibility performance.
What are the LED indicators for the sensor status?
The sensor uses LEDs to indicate its status. A green LED indicates power supply is active, while yellow LEDs indicate digital outputs. Different LED patterns indicate specific events such as magnet not detected, standard I/O operation, or IO-Link communication.
What are the recommended magnets for use with the MAS?
It is strongly recommended to use SICK-specific magnets, such as MAG-1005-N (article number #5344197) or MAGH-1004-N (article number #2126478). These magnets are qualified for use with the MAS and ensure optimal performance.
How to mount the MAS sensor?
The MAS can be mounted using two screws or mounting clips. Use M4 screws with washers and ensure the maximum allowable torque of 1 Nm is not exceeded. Avoid using ferromagnetic materials for mounting components.
What are the electrical connection requirements for the sensor?
For standard I/O mode, ensure the sensor is connected with a voltage-free setup. Follow the pin assignment for connector connections and use the specified wire colors. For IO-Link mode, connect the device to an appropriate IO-Link master and integrate the IODD or function block in the master or controller.
What are the safety precautions for installation?
The sensor should not be installed in areas exposed to direct UV radiation or weather conditions unless explicitly allowed in the manual. Ensure the device is protected from moisture and contamination during installation. Always follow the safety guidelines provided in the manual.
What is the purpose of the IO-Link communication?
IO-Link communication allows for configuration and monitoring of the sensor. It enables the adjustment of angular window settings and mapping to digital output channels. The green LED pulses to indicate active IO-Link communication.
What are the environmental conditions for the sensor?
The sensor operates within a temperature range of -40°C to +60°C. It is rated for an enclosure type 1 environment and should be supplied with a Class 2 voltage supply. Ensure the sensor is installed in a location that meets these environmental requirements.
What are the recommended distances for other magnets near the sensor?
No other ferromagnetic materials should be present within a 40 mm radius of the sensor's center. Additionally, within a 47 x 20 mm area around the sensor, there should be no ferromagnetic material to avoid interference with the sensor's operation.