Dell FC8PT (116 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I install the pass-through module?
To install the pass-through module, first remove the pin cover from the connector pins at the back of the module. Locate an empty module bay in the server, and ensure the latching arm is in the unlatched position. Slide the module into the bay until it stops, then rotate the latching arm upward until it is flush against the front panel and seated in the latch.
What type of fiber optic cable should I use?
Use multimode fiber optic cable that adheres to specific specifications. For 62.5/125 μm fiber, the maximum length is 200 meters at 2.125 Gb/s, 70 meters at 4.25 Gb/s, and 21 meters at 8.5 Gb/s. For 50/125 μm fiber, the maximum length is 500 meters at 2.125 Gb/s, 300 meters at 4.25 Gb/s, and 150 meters at 8.5 Gb/s. Ensure the minimum length is 0.5 meters and use LC connectors.
What do the status LEDs indicate?
The pass-through module has several LEDs that indicate the status of the ports and the module itself. Each port includes a green and yellow LED to show the status of the SFP, including link rates and POST conditions. At the bottom of the module, there is a blue and green LED pair that shows the status of the pass-through module. Refer to the tables provided for detailed descriptions of each LED state.
What should I do if I have issues with the module?
If you experience issues with the FC8PT Pass-Through Module, contact Dell support. The limited warranty for Dell-branded products applies to this module, as described in the Product Information Guide or on the local country Dell website. Ensure you follow all installation and safety guidelines to avoid any potential damage.
Are there any driver requirements for this module?
There are no drivers, firmware, or boot code required for the FC8PT Pass-Through Module. If utility software is needed, it may be found in the Technical Support section of the Dell website. Ensure you follow the installation instructions provided in the manual to avoid any compatibility issues.
What safety precautions should I take when installing the module?
Handle the module with care, as it contains static-sensitive components that may be damaged during installation. Use static precautions such as grounded wrist straps. Avoid exposing the module to laser light, and ensure you use only CDRH Certified Class 1 Laser Devices to prevent any potential safety hazards.
How do I interpret the LED blinking patterns?
The LED blinking patterns indicate the status of the module and its ports. For example, a fast blink on the green LED may indicate a normal link up at 2, 4, or 8 Gb/s, while a slow blink may indicate a link down or an offline state. A one-second pause between blinks is normal, so observe the LED sequence for several seconds to accurately interpret the status.
What is the purpose of the pass-through module?
The FC8PT Pass-Through Module allows for the connection of fiber optic cables between the server and target Fibre Channel devices. It provides a physical interface for data transmission and includes status LEDs to monitor the health and performance of the module and its ports.
What are the specifications for the fiber optic cable?
The fiber optic cable must be multimode and adhere to specific bandwidth and length requirements. For 62.5/125 μm fiber, the maximum length is 200 meters at 2.125 Gb/s, 70 meters at 4.25 Gb/s, and 21 meters at 8.5 Gb/s. For 50/125 μm fiber, the maximum length is 500 meters at 2.125 Gb/s, 300 meters at 4.25 Gb/s, and 150 meters at 8.5 Gb/s. Use LC connectors and ensure the minimum length is 0.5 meters.
What is the warranty coverage for the FC8PT Pass-Through Module?
The FC8PT Pass-Through Module is covered under the limited warranty for Dell-branded products. This warranty applies as described in the Product Information Guide or on the local country Dell website. Ensure you follow all installation and safety guidelines to maintain warranty coverage and avoid any potential damage.
Related products from Dell
H952N
User manual 94 pages
H952N
User manual 202 pages
H952N
User manual 202 pages
K805N
User manual 94 pages
K805N
User manual 202 pages
K805N
User manual 202 pages
4200W
User manual 202 pages
J730N
User manual 94 pages
J730N
User manual 202 pages
J730N
User manual 202 pages
3750W
User manual 202 pages
K804N
User manual 94 pages
K804N
User manual 202 pages
K804N
User manual 202 pages
3750R
User manual 202 pages
J739N
User manual 94 pages
J739N
User manual 202 pages
J739N
User manual 202 pages