Resol KM1 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the KM1 communication module?
The KM1 communication module is delivered with a pre-connected power supply and VBus® cable. No need to open the housing for installation. The initial setup must be performed by the system installer or a designated professional.
What are the technical specifications of the KM1 module?
The KM1 module has a plastic housing made of PC-ABS and PMMA, IP20 protection rating, and operates within a temperature range of 0 to 40°C. It has a diameter of 130 mm and depth of 45 mm. It supports VBus® and Ethernet connections with a power consumption of less than 1.95 W.
How to connect the KM1 module to a regulator?
Connect the VBus® cable from the KM1 module to the regulator using the terminal block. The VBus® cable can be extended using the provided lamp holder clamp and standard 2-conductor twisted pair cable. Ensure the VBus® cable is properly connected to the regulator's terminal block as specified in the regulator's manual.
How to configure the KM1 module via the web interface?
Access the web interface through an internet browser. Log in with the default username 'admin' and password 'admin'. From the main menu, navigate to 'Configuration' to adjust settings such as language, network parameters, firmware updates, and remote access.
What are the LED indicators on the KM1 module?
The KM1 module has a status LED that indicates the operational state. A solid orange light means a VBus® signal is present but no connection to VBus.net. A solid green light indicates a VBus® signal and a connection to VBus.net. A blinking orange light means the device is booting. A blinking green light indicates the device has a VBus® signal and IP address but no connection to VBus.net.
How to change the language in the web interface?
To change the language in the web interface, navigate to the 'Configuration' section in the main menu. Select the 'Language' option and choose the desired language from the available options. The change will take effect after saving the settings.
How to reset the KM1 module to factory settings?
To reset the KM1 module to factory settings, press and hold the reset button until the LED starts blinking. This will restore the module to its default configuration, including the default username and password.
How to check the firmware version of the KM1 module?
To check the firmware version, navigate to the 'Status' section in the web interface. Under 'About', you will find the firmware version, update date, and other system information. This helps in verifying the current software version and planning updates.
How to configure network settings for the KM1 module?
To configure network settings, go to the 'Status' section in the web interface and select 'Network Settings'. Here, you can view and modify the LAN IP address, subnet mask, gateway, and DNS server settings. These settings are crucial for ensuring proper network connectivity and communication.
How to access the KM1 module remotely?
To enable remote access, navigate to the 'Remote Access' section in the web interface. Configure the settings to allow access via VBus.net. This allows remote monitoring and control of the module over the internet, provided the correct credentials and network settings are in place.