Abus FUBW50022-1 (110 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the operating range of the motion detector?
The motion detector has a configurable detection range between 10 and 30 meters. The range can be adjusted using the provided table and by tilting and angling the objective module to cover the desired area.
How do I install the motion detector?
Install the motion detector by securing it to the wall using the provided screws and mounting brackets. Ensure the wall cut-out contact is correctly positioned and the switch is closed. Use the included screwdriver to remove the front cover and adjust the sensor as needed.
What type of batteries does the motion detector use?
The motion detector is powered by two 3V CR123A batteries. These batteries are non-rechargeable and must be disposed of according to local regulations. Avoid exposure to heat, water, or direct sunlight to prevent damage.
How do I adjust the sensor direction?
To adjust the sensor direction, use the included mounting tools to tilt and angle the sensor module up to 180° horizontally and 90° vertically. Ensure the LED indicator faces forward for proper alignment and to avoid false alarms.
What is the purpose of the lens covers?
The lens covers are used to reduce the scanning angle and limit the detection area. They can be attached to the swivel/tilt module to narrow the field of view, especially when a minimal scanning angle of 10 degrees is required.
How do I test the motion detector?
To test the motion detector, remove the front cover and adjust the sensor range using the provided table. Press the programming button to activate the test mode, which will display a red indicator and set the impulse count to '1'. The test mode will automatically stop after 5 minutes or can be manually stopped by cutting the power.
What should I avoid when installing the motion detector?
Avoid exposing the motion detector to moisture during installation, as this can damage the internal components. Ensure the antenna is not touched or bent during installation. Use the provided mounting template to drill holes for the screws and wall cut-out contact.
How do I dispose of the batteries?
Dispose of the batteries according to the WEEE 2002/96/EC directive. Do not throw them in household waste. Instead, return them to a designated collection point for electronic waste. Avoid exposing batteries to heat, water, or direct sunlight.
What safety precautions should I take?
Do not allow batteries to come into contact with water, heat sources, or children. Avoid short-circuiting the battery contacts and never attempt to disassemble, puncture, or damage the batteries. Always follow the safety instructions to prevent injury or damage to the device.
What are the key features of the motion detector?
The motion detector uses two independent infrared sensors housed in a weatherproof casing. It is designed for use in alarm systems and features configurable impulse counting and detection range. It includes a tamper-proof cover, a wall cut-out contact, and a waterproof, UV-resistant housing to protect against environmental factors.