STEINEL L22S (24 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the STEINEL L22S detect motion?
The L22S uses passive infrared (PIR) technology to detect changes in infrared radiation caused by moving people or objects. This method reliably triggers lighting when movement enters the sensor’s field, reduces unnecessary operation, and helps save energy. For best results, position the sensor to get a clear line of sight over the monitored area.
What detection range and angle does the L22S offer?
The device detects motion at distances of up to 12 meters with a 180-degree coverage angle, allowing broad area monitoring. This wide field is suitable for entrances and terraces. When planning placement, ensure the coverage pattern matches the area to avoid blind spots and overlapping sensors.
How can I adjust the sensitivity and time settings on the L22S?
The L22S provides adjustable sensitivity and time-delay controls so you can tailor detection responsiveness and light-on duration to the environment. Lower sensitivity reduces false triggers, while longer time delays keep lights on for extended periods. Adjust settings incrementally and test during different conditions to find the ideal balance.
What does the built-in twilight sensor do and how does it save energy?
The twilight sensor measures ambient light and only allows the motion detector to switch lights when illumination is below a set threshold. This prevents lights from switching on during daylight, reducing energy consumption and lamp wear. Fine-tune the threshold to match local lighting conditions for maximum savings.
Is the STEINEL L22S suitable for outdoor wall or ceiling installation?
Yes, the L22S has a weatherproof housing designed for outdoor installation on walls or ceilings and withstands typical external conditions. Install it in a protected location if possible to limit direct exposure to driving rain or debris. Secure mounting and correct orientation improve detection performance and longevity.
How can I reduce false triggers from pets or small animals?
To minimize pet-triggered activations, lower the sensitivity setting, adjust the sensor’s orientation away from ground level, or limit the detection area. Positioning the sensor higher and angling it so small movements near the ground are outside the main detection zone helps prevent nuisance switching while preserving coverage for people.
What maintenance does the STEINEL L22S require to remain reliable?
Routine maintenance includes keeping the lens and housing clean from dust, insects, and cobwebs, checking seals for damage, and performing periodic functional tests. Avoid abrasive cleaners and solvents. Regular inspections ensure consistent detection, prevent ingress issues, and extend service life in outdoor environments.
Is the L22S compatible with LED and other modern light sources?
The L22S is intended to control lighting loads, but compatibility with LEDs and electronic drivers depends on the lamp type and switching characteristics. Some LED drivers and low-power lamps may require specific switching components. Verify the load specifications and consider using a suitable relay or contactor for problematic fixtures.
How do weather and temperature affect PIR performance of the L22S?
PIR sensors detect temperature differences between moving objects and the background, so very small temperature differentials or strong direct sunlight can reduce sensitivity or cause spurious triggers. Heavy rain, snow or fog can also affect performance. Shelter the unit from direct sun and severe weather to maintain consistent operation.
What should I check if the L22S does not switch the lights?
First confirm power to the unit and proper wiring, then verify sensitivity, time and twilight settings are appropriate. Ensure the lens is clean and not obstructed. If the problem persists, check the controlled light’s compatibility and switching device; if necessary, involve a qualified electrician to inspect wiring and connections.
Related products from STEINEL
IS345
User manual 64 pages
IS345
User manual 70 pages
IS345
User manual 152 pages
HPD 3 IP
User manual 37 pages
HPD 3 IP
User manual 40 pages
L20S
User manual 24 pages
L20S
User manual 24 pages
IS 2180-2
User manual 47 pages
IS 2180-2
User manual 93 pages
IS 2180-2
User manual 248 pages
NF 50 UP
User manual 43 pages
NF 50 UP
User manual 44 pages
IS3360
User manual 64 pages
IS3360
User manual 70 pages
IS3360
User manual 152 pages
IS3360 MX Highbay
User manual 58 pages
IS3360 MX Highbay
User manual 70 pages
IS345MX Highbay
User manual 58 pages
IR Quattro COM 1 AP
User manual 140 pages
IR Quattro HD DIM
User manual 140 pages