amazon basics B010QZCT5W (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum weight the wall mount arm can support?
The wall mount arm supports monitors weighing between 5 to 25 lbs (2.3 to 11.3 kg). Ensure the monitor weight falls within this range for safe installation.
Can the monitor be adjusted vertically?
Yes, the wall mount arm allows vertical adjustment. The base can move up to 4.7 inches (11.9 cm) above the base and down to 8.3 inches (20.7 cm) below the base.
How do I install the mount on a concrete wall?
To install on a concrete wall, use a 3/8” (10 mm) masonry bit to drill 3-1/8” holes. Insert the concrete anchors flush against the wall, then secure the base with M8 × 80 mm lag bolts using a socket wrench.
What tools are needed for installation?
You will need a level, stud finder, pencil, Phillips screwdriver, tape measure, hammer, socket wrench with 13 mm socket, and a drill. Ensure all tools are ready before starting the installation.
How do I adjust the monitor's orientation?
The monitor can be mounted in a locked portrait or landscape orientation, or left to rotate 360°. To lock the orientation, insert the M3 x 6 mm screw into the front of the upper arm plate. Removing the screw allows free rotation.
What is the horizontal reach of the mount?
The mount can extend up to 25.7 inches (65.3 cm) from the wall. When fully extended, the base can flatten 3.9 inches (9.9 cm) from the wall for optimal viewing.
Can I mount the arm on a wood stud wall?
Yes, for wood stud walls, locate the stud using a stud finder. Mark the center with a vertical line, then drill 3.1 inches (80 mm) deep holes using a 3/16” (5 mm) bit. Secure the base with M8 × 80 mm lag bolts.
What should I do if the monitor is too heavy?
If the monitor weighs over 20 lbs (9 kg), the height range may decrease by up to 4.5 inches (11.4 cm). Ensure the monitor weight is within the supported range to maintain stability and safety.
How do I attach the monitor to the upper arm?
Attach the upper arm to the back of the monitor using M4 × 10 mm screws and a Phillips screwdriver, or M4 × 10 mm knobs. Hand-tighten the knobs. Ensure the screws or knobs fit the monitor's screw holes to avoid damage.
What safety precautions should I take during installation?
Always use safety goggles during installation. Ensure mounting holes are in solid concrete for concrete walls. If unsure about wall type or installation, consult a construction professional to avoid unstable or unsafe conditions.